Gunsmith Machinist Accessories US Specifications
|
|
|
 Brownells Toolmakers Parallel Clamps #010 Toolmakers Clamp US Specifications
USD 21.99
(Indicative price - actual current price possibly lower)
Technical data & information: Universally used by toolmakers and gunsmiths for close, precision holding of unusual shapes for welding, brazing, scribing, drilling. A must for scope, sight or bolt work. Mfg: brownells specs: #005, 2" (5.1cm) long jaws, 1.285" (3.3cm) jaw spread. #010, 3" (7.6cm) long jaws, 2.185" (5.5cm) jaw spread. #015, 4" (10.2cm) long jaws, 2.95" (7.5cm) jaw spread. US specification & reliable quality gunsmith machinist accessories by Brownells. Part Nr: 52465010.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Screw Slot Fixture US Specifications
USD 44.99
(Indicative price - actual current price possibly lower)
Technical data & information: Heat-treated, steel fixture makes it possible to cut screw slots precisely in the center of the head. Simplifies fitting new screws to a custom gun or recutting/repairing some on a classic. Clamping thumb screw locks the gun screw in the exact position you want; two sets of roller pins guide your saw or slotting file during cutting to produce screw slots with a look of true class. Mfg: brownells specs: heat-treated steel, black, oxide finish. 2" (5.1cm) long, 1βό" (3.2cm) wide, 7/8" (22.2mm) high. For use with .025" thick files and blades. US specification & reliable quality gunsmith machinist accessories by Brownells. Part Nr: 080-000-082.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Toolmakers Parallel Clamps #005 Toolmakers Clamp US Specifications
USD 19.99
(Indicative price - actual current price possibly lower)
Technical data & information: Universally used by toolmakers and gunsmiths for close, precision holding of unusual shapes for welding, brazing, scribing, drilling. A must for scope, sight or bolt work. Mfg: brownells specs: #005, 2" (5.1cm) long jaws, 1.285" (3.3cm) jaw spread. #010, 3" (7.6cm) long jaws, 2.185" (5.5cm) jaw spread. #015, 4" (10.2cm) long jaws, 2.95" (7.5cm) jaw spread. US specification & reliable quality gunsmith machinist accessories by Brownells. Part Nr: 52465005.
More Details : click here
SEARCH this site : click here
|
|
|
Gun Video Catalog Magnetic Parts Tray US Specifications
USD 15.99
(Indicative price - actual current price possibly lower)
Technical data & information: Magnetic surface keeps steel springs, screws and other small, easy-to-lose parts safely where you put them. Has just enough magnetic pull to capture the parts without magnetizing them, with raised sides to keep them corralled. Great when taking apart small assemblies, like trigger groups, to keep the parts from rolling off your work bench. Mfg: gun video catalog specs: plastic tray with magnetic pad, black. Approximately 6" (15.2cm) long, 4" (10.2cm) wide, 3⁄8" (9.5mm) height. US specification & reliable quality gunsmith machinist accessories by Gun Video. Part Nr: T0737.
More Details : click here
SEARCH this site : click here
|
|
|
Devcon Express Dykem Layout Fluid Dykem Steel Blue Layout Fluid US Specifications
USD 13.99
(Indicative price - actual current price possibly lower)
Technical data & information: Eliminates the glare from bare metal, making it easy on the eyes. Gives excellent definition to layout lines for faster, more exact work. Adds practically no thickness (less than .0002"). Non-corrosive, will not harm steel, iron, bronze, aluminum or any other metal. Brushes on from can right at work bench. Dries in 2 minutes, hard and ready to work in 5. Resists water and oil.[cannot ship by blue label or air] mfg: devcon express specs: 4 oz. (118.2ml) brush-top can. US specification & reliable quality gunsmith machinist accessories by Devcon. Part Nr: 25380300.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells "v" Blocks 116 V Block US Specifications
USD 62.99
(Indicative price - actual current price possibly lower)
Technical data & information: The only accurate way to hold barrel and receiver when aligning scope/sight screw holes if a jig is not being used and special drill press vises are not available. Set of 2 v blocks and 2 clamps. Mfg: brownells specs: cast iron. Approximately 1β½" (3.8cm) sq. X 2" (5.1cm) long. US specification & reliable quality gunsmith machinist accessories by Brownells. Part Nr: 71264634.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Lathe Centering Buttons Pair US Specifications
USD 34.99
(Indicative price - actual current price possibly lower)
Technical data & information: Precision-ground and hardened "buttons" help ensure correct lathe alignment, quickly. Move head and tailstock together with buttons be- tween centers until button faces touch. If o.D. Over button joint measures .900", (nominal button o.D.) head and tailstock are aligned. If not, the buttons are offset, and so are your headstock and tailstock. Make adjustments and re-measure. Mfg: brownells specs: steel. .560" (14.2mm) long x .900" (22.9mm) diameter. US specification & reliable quality gunsmith machinist accessories by Brownells. Part Nr: LATHEBUTTON.
More Details : click here
SEARCH this site : click here
|
|
|
Starrett Angle Meter US Specifications
USD 17.99
(Indicative price - actual current price possibly lower)
Technical data & information: High-impact polymer angle meter is ideal for leveling, setting and verifying the proper angle on milling decks, drill press vises, surface grinders, and stock duplicators. Features a large, easy-to-see scale for accurate measurements from 0 to 90 degrees in any quadrant, plus a built-in magnetic base for hands-free operation on metallic objects. Measures any angle for pitch or slope and includes an easy-to-read table for converting rise and run information. Mfg: starrett specs: polymer with magnetic base. 4ß?" (10.8cm) long, 5⁄8" (1.6cm) wide, 5" (12.7cm) high. Measures to β½ degree. US specification & reliable quality gunsmith machinist accessories by Starrett. Part Nr: 36080.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Toolmakers Parallel Clamps #015 Toolmakers Clamp US Specifications
USD 30.99
(Indicative price - actual current price possibly lower)
Technical data & information: Universally used by toolmakers and gunsmiths for close, precision holding of unusual shapes for welding, brazing, scribing, drilling. A must for scope, sight or bolt work. Mfg: brownells specs: #005, 2" (5.1cm) long jaws, 1.285" (3.3cm) jaw spread. #010, 3" (7.6cm) long jaws, 2.185" (5.5cm) jaw spread. #015, 4" (10.2cm) long jaws, 2.95" (7.5cm) jaw spread. US specification & reliable quality gunsmith machinist accessories by Brownells. Part Nr: 52465015.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Crown Saver Lathe Center Cover Small Crown Saver 10 Pak US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Technical data & information: These brass cones take much of the anxiety out of lathe-turning a perfectly good barrel with an already finished crown. Insert a crown saver between the muzzle and lathe or mill center before fluting, chambering, polishing, or threading for a muzzle brake, and you can rest assured you won't harm the rifling or ding the crown. Each brass cone is machined to within .0002" or less concentricity, making using a crown saver as accurate as direct barrel contact against the center. With a crown saver, you virtually eliminate any chance of swaging the rifling. It stays seated and will not spin in the bore when the barrel is chucked in the lathe. Small fits bores .17 to .45 caliber. Large mfg: brownells specs: 360 brass. Maximum diameter. Small, .500", large, .750". US specification & reliable quality gunsmith machinist accessories by Brownells. Part Nr: 80000379.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Machine Setup Gauge US Specifications
USD 57.99
(Indicative price - actual current price possibly lower)
Technical data & information: Easily centers cutting tools for conventional lathe operations on either flat or rounded stock. For milling operations, makes indexing of squares, hexes, triangle, parallels and flats fast, easy and exact to min. Of angle. All surfaces are machined true to all other surfaces so can be used in literally hundreds of setup operations. Built-in level. Mfg: brownells specs: aluminum, silver, matte finish. 1-7/16" (3.65cm) x 1-7/16" x β½" (12.7mm). US specification & reliable quality gunsmith machinist accessories by Brownells. Part Nr: 100233.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Lathe Centering Bar 1 1/4" X 24" US Specifications
USD 203.99
(Indicative price - actual current price possibly lower)
Technical data & information: Steel bar lets you set up and check the trueness of your lathe. Accurately confirms the alignment of centers and helps precisely offset the tailstock for cutting tapers. Recesses on each end align headstock and tailstock centers to prevent taper cuts. Available in 1βό" x 24". Mfg: brownells specs: steel. 1ß?" (3.1cm) x 24" (60.9cm). US specification & reliable quality gunsmith machinist accessories by Brownells. Part Nr: 080-000-258.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Crown Saver Lathe Center Cover Large Crown Saver 3 Pak US Specifications
USD 19.99
(Indicative price - actual current price possibly lower)
Technical data & information: These brass cones take much of the anxiety out of lathe-turning a perfectly good barrel with an already finished crown. Insert a crown saver between the muzzle and lathe or mill center before fluting, chambering, polishing, or threading for a muzzle brake, and you can rest assured you won't harm the rifling or ding the crown. Each brass cone is machined to within .0002" or less concentricity, making using a crown saver as accurate as direct barrel contact against the center. With a crown saver, you virtually eliminate any chance of swaging the rifling. It stays seated and will not spin in the bore when the barrel is chucked in the lathe. Small fits bores .17 to .45 caliber. Large mfg: brownells specs: 360 brass. Maximum diameter. Small, .500", large, .750". US specification & reliable quality gunsmith machinist accessories by Brownells. Part Nr: 080-000-869.
More Details : click here
SEARCH this site : click here
|
|
|
Fisher Machine Shop Pee Dee Thread Measuring Wires Pee Dee Thread Wire Set US Specifications
USD 45.99
(Indicative price - actual current price possibly lower)
Technical data & information: Quickly and accurately measures pitch diameters of external threads-a must-have when cutting or checking threads on precision screws. Accurate to within /- .0001" along the center 1" section. Measures the following pitch sizes: 3 to 48 tpi, .5mm to 6mm pitch, and acme 3 to 16 tpi. Includes plastic storage sleeve, conversion chart and instructions. Requires micrometer, not included. Mfg: fisher machine shop, inc. Specs: steel, 2βύ" (7cm) oal. Contains 16 different wire sizes, (3) of each diameter: .018" (.45mm), .024" (.61mm); .029" (.74mm), .032" (.81mm), .040" (1mm); .045" (1.1mm), .055" (1.4mm), .063" (1.6mm), .072" (1.8mm), .081" (2.1mm), .092&. US specification & reliable quality gunsmith machinist accessories by Fisher. Part Nr: 16.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gunsmith Machinist Accessories US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
