Colt Mustang Pocketlite 380 Slide Assembly US Specifications
Handgun Slides by Colt
|
 Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Caspian 1911 Slides Carbon Steel Nc Sight Cut 9mm US Specifications
USD 208.99
(Indicative price - actual current price possibly lower)
Handgun Slides US Specifications
Technical data & information: Custom-quality slides from caspian, ready to be fitted to the frame of your choice. They start as high-quality forgings for extra strength, then are heat-treated to rc 38-41 before machining for exceptional dimensional stability. Sides are polished, while the rest of the surface is bead-blasted for a non-glare, matte finish. Deep-cut, forward-angled rear cocking serrations prevent slippage when racking, even with a wet hand. Available in 4340 carbon steel (cs) and 416 stainless steel (ss) with .45 acp, .40 s&w, and 9mm breechfaces. Commander and officers models in .45 acp only. Choose a slide without sight cuts (nc), or between two pre-cut dovetail options: a novak lo-mount or bo-mar mfg: caspian specs: 4340 carbon steel, in-the-white, or 416 stainless steel, natural finish. Government model accepts 5" barrel. Commander accepts 4.25" barrel. Officers model accepts 3.5" barrel. All caspian slides require the use of a 9mm/.38 super firing pin. US specification & reliable quality handgun slides by Caspian. Part Nr: 1SC38G71RW00X1L.
More Details : click here
SEARCH this site : click here
|
|
|
Glock G17 Gen 4 Mos Slide Kit Complete G17 Gen 4 Mos Slide Kit Black US Specifications
USD 375
(Indicative price - actual current price possibly lower)
Handgun Slides US Specifications
Technical data & information: This slide assembly is the complete "top half" of the glock g17 gen4 mos pistol, fully assembled and straight from the glock factory. The modular optic system, mos for short, slide enables you to easily install a red dot reflex sight on your glock 17, while retaining the use of "iron" sights on your pistol if you choose. This is the fastest, easiest way to convert your g17 to a reflex optic and ensure full compatibility with your pistol's frame and fire control system without gunsmith tweaking. The g17 gen4 mos slide assembly comes with a slot machined in the top to accept the red dot sight. Interchangeable adapters fit into the slot and allow you mfg: glock. US specification & reliable quality handgun slides by Glock. Part Nr: GLG417UBLKMOS.
More Details : click here
SEARCH this site : click here
|
|
|
Fusion Firearms 1911 5" Govt Gi Slide/Top End Assembly Carbon Black 1911 5" Government 45 Acp Gi Top End Assembly Carbon Black US Specifications
USD 494.99
(Indicative price - actual current price possibly lower)
Handgun Slides US Specifications
Technical data & information: 1911 slide / top end assembly. Fusion diamond series, 5 inch standard gi / mil-spec , 1911 colt style, slide / top-end chambered in 45 acp or 9mm. Comes completely assembled with recoil system and tested. Features gi/mil spec rear serrations and mil spec blade rear sight with standard black combat front sight. Diamond series slides are precision cnc machined from solid 4140 bar-stock and heat treated. These tops ends are completely assembled and finished and have been test fired on a slave frame for function. The assembly comes complete with: slide, barrel, barrel bushing, link, link pin, extractor, firing pin, firing pin spring, stop plate, recoil system, and sights. All completely mfg: fusion firearms. US specification & reliable quality handgun slides by Fusion. Part Nr: DIAUP454.
More Details : click here
SEARCH this site : click here
|
|
|
Jager Werks Breacher Custom Glock W/Rmr Cut Breacher Custom Glock 17 Slide Rmr Battleworn Black/Fde US Specifications
USD 1169.99
(Indicative price - actual current price possibly lower)
Handgun Slides US Specifications
Technical data & information: The jagerwerks customized glock oem slide assembly provides a high-quality option allowing you to customize your glock in one easy step. This customized glock slide assembly provides a window machined on both sides of the slide to give it that ultimate customized look as well as saving some weight. Front and top cocking serrations are added, providing possibly the most functional upgrade to any glock handgun. The rmr cut is machined in front of the factory rear dovetail. Black nitride and cerakote finish available in black, fde, & "battleworn" includes carbon fiber rmr cover and back plate includes oem glock barrel, sig mfg: jager werks. US specification & reliable quality handgun slides by Jager Werks. Part Nr: 100-024-405.
More Details : click here
SEARCH this site : click here
|
|
|
Sti 1911/2011 Slides 5.0 Classic 400 US Specifications
USD 251.99
(Indicative price - actual current price possibly lower)
Handgun Slides US Specifications
Technical data & information: Sti international slides are cnc milled from pre-hardened barstock 4140 carbon steel to ensure slide rail exactness. The breech face is wire edm cut for maximum precision angle. These are available in either 5′ (government), or 6′ (long slide). The slides have lowered and flared ejection ports for reliable case ejection. Sti slides fit both 1911 and 2011 frames. 355 is compatible with 9mm, 38 super and similar cartridges. 400 is compatible with 40 s&w and similar cartridges. 450 is compatible with 45 acp and similar cartridges. Mfg: sti specs: 4140 carbon steel. US specification & reliable quality handgun slides by STI. Part Nr: 17190009.
More Details : click here
SEARCH this site : click here
|
|
|
Voodoo Innovations Enforcer G17 & G19 Slide Assembly Enforcer G17 Slide Assembly Gen 3 US Specifications
USD 729.99
(Indicative price - actual current price possibly lower)
Handgun Slides US Specifications
Technical data & information: The voodoo innovations glock 9mm slide assembly is designed as an improved drop-in fit for the glock. The vdi slide is profiled and lightened to reduce recipricol mass and decrease felt recoil. Our vdi slides are cut from stainless steel with enhanced front and rear cocking serrations for improved manipulation and improved slide geometry to draw your eye to the front sight. The vdi barrel is machined to tighter fitment tolerances to increase accuracy potential without the need of gunsmith fitting. The barrel features a saami spec 9mm match chambering, match grade rifling to allow the use of any 9mm projectile (not just jacketed bullets), threaded β½ x 28 tpi for use with mfg: voodoo innovations. US specification & reliable quality handgun slides by Voodoo. Part Nr: FGAV41006.
More Details : click here
SEARCH this site : click here
|
|
|
Zev Dragonfly G17 & G19 3g Slide Kits Dragonfly G17 3g Slide Kit Black US Specifications
USD 798
(Indicative price - actual current price possibly lower)
Handgun Slides US Specifications
Technical data & information: The zev technologies dragonfly slides were designed with tighter tolerances to increase accuracy & performance. Machined from billet 1704 stainless steel & coated with a dlc finish, these aftermarket glock slides make for an excellent upgrade. Zev custom serrations & cutouts allow for a unique look, while providing a lighter, yet rugged slide. Rear is cutout for standard glock sight, as well as a trijicon rmr. Alignment allows for a co-witness of sights with rmr dot. Slide includes mounting screws. Blue loc-tite recommended for installation. Slide kit contains the slide, cover plate with screws, rmr gasket, rmr mounting screws, fir mfg: zev technologies. US specification & reliable quality handgun slides by ZEV. Part Nr: SLDZ173GDFLYDLC.
More Details : click here
SEARCH this site : click here
|
|
|
Zev Technologies Raven Limited Edition G19 Slide Gen 3/4 Zev Raven G19 Gen 4 Stripped Slide Dlc Black US Specifications
USD 550
(Indicative price - actual current price possibly lower)
Handgun Slides US Specifications
Technical data & information: Available for a limited time only, the zev technologies raven limited edition g19 stripped slide provides glock handgun owners with a unique opportunity to add a custom touch to their go-to polymer-framed pistol. Each raven limited edition g19 slide is machined from 1704 stainless steel and features an all-black dlc coating for enhanced ruggedness. The slide is purpose-built for use in any kind of scenario, providing improved flexibility and functionality, thanks to a lowered ejection port and slide cut designed for a trijicon rmr red-dot sight. One of the other stand-out features of the zev technologies raven limited edition g19 slide is the inclusion of the company's mfg: zev technologies. US specification & reliable quality handgun slides by ZEV. Part Nr: SLDZ194GRAVEN.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Rmr Cut Slide For Gen3 Glock 9mm Rmr Slide +window For Gen3 Glock 19 Stainless Nitride US Specifications
USD 179.99
(Indicative price - actual current price possibly lower)
Handgun Slides US Specifications
Technical data & information: Brownells front cut rmr slides for glock pistols feature a distinctive, wraparound serration pattern that aids in manipulating the slide, especially when checking the chamber. (ok, we'll admit it: the serrations look cool, too.) they also come with a pre-cut slot for easy, secure, low-profile mounting of a trijicon rmr sight. All slides equipped with standard glock sight cuts for front and rear sights of your choice. If the rmr is in place, suppressor height sights are required. In addition, you can get your front cut rmr slide with an optional "window" cutout on top between the front serrations that reduces weight and enhances airflow to keep the barrel coo mfg: brownells. US specification & reliable quality handgun slides by Brownells. Part Nr: 078-200-004.
More Details : click here
SEARCH this site : click here
|
|
|
Zev Z17 Dragonfly Stripped Slide With Rmr 3rd Gen Gray US Specifications
USD 499.99
(Indicative price - actual current price possibly lower)
Handgun Slides US Specifications
Technical data & information: The zev tech z17 3rd gen dragonfly stripped slide is an aftermarket component that users can purchase in order to improve the aesthetics and function of their full-size glock g17 pistol. The zev tech z17 3rd gen dragonfly stripped slide is completely cnc-machined using a blank of 17-4 stainless-steel billet, but the slide is precision cut to maintain a tight set of tolerances, ensuring that users get heightened performance and capability out of their glock g17 pistol. Features lowered ejection port comes with dlc and pvd coatings available in black and gray finishes cut to accept trijicon rmr red-dot optic the zev tech z17 3rd gen dragonfly s mfg: zev technologies. US specification & reliable quality handgun slides by ZEV. Part Nr: SLDZ173GDFLY.
More Details : click here
SEARCH this site : click here
|
|
|
Primary Machine S&W M&P Ucc V3 Custom Rmr Slide Ucc V3 Custom S&W M&P Rmr Slide Geocam US Specifications
USD 849.99
(Indicative price - actual current price possibly lower)
Handgun Slides US Specifications
Technical data & information: The primary machine complete customized m&p oem slide assembly provides m&p pistol owners with the opportunity to add a factory-built slide to their gun that features a wide array of custom machined features. The primary machine complete customized m&p oem slide assembly features window cuts on the slides, improving barrel cooling. The upgrades also include forward cocking serrations, glock-cut rear sights and a precision-machined cutout to fit an rmr reflex sight. Designed for 9mm guns features cerakote finish available in black, flat dark earth or geocam camouflage the primary machine complete customized m&p oem slide assembly comes complet mfg: primary machine. US specification & reliable quality handgun slides by Primary. Part Nr: 100-024-797.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Iron Sight Slides For Gen 4 Glock 9mm Iron Sight Slide For Gen 4 Glock 17 Ss Nitride US Specifications
USD 199.99
(Indicative price - actual current price possibly lower)
Handgun Slides US Specifications
Technical data & information: Though glock handguns are known for their reliability under extreme conditions, machines can malfunction, and they'll do so often at the most inopportune times. If you need to clear a malfunction from your slide, having a design like the brownells gen 4 glock iron sight slide makes manipulation fast and easy. Unlike glock oem slides, the brownells gen 4 glock iron sight slide is machined with wraparound serrations that comes over the top of the slide, providing more textured surface area that'll grab the skin of a shooter's palm and enable them to draw the slide rearward in a flash. The slide is machined from 17-4 stainless steel and is treated with a nitride finish to pr mfg: brownells. US specification & reliable quality handgun slides by Brownells. Part Nr: 078-000-456.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Colt Mustang Pocketlite 380 Slide Assembly US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
