Evolution Armory .480x65 Dovetail Cutter .480x65 Dovetail Cutter US Specifications
Gunsmith Power Milling Cutters by Evolution
|
Technical data & information: The .480x65 dovetail cutter enhances the capabilities of any gunsmith looking to install low mount sights onto project handguns and ensures that they have the right high-quality tool for the job. The .480x65 dovetail cutter is designed specifically to cut a slightly undersized slot for rear sights that fit a standard .500" dovetail. The cutter is slightly undersized in order to provide gunsmiths with the ability to do final fitting and ensure that even slightly undersized sights will work. Cutting tool made from solid carbide six-flute design made with 1/2-inch shank the .480x65 dovetail cutter measures 2.53 inches in overall length and can be used to r mfg: evolution armory. US specification & reliable quality gunsmith power milling cutters by Evolution. Part Nr: DG5770.
 Indicative Price: USD 162.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Brownells Carbide Semi Auto Pistol Sight Base Cutter 60Β°carbide Semi Auto Sight Base Cutter US Specifications
USD 85.99
(Indicative price - actual current price possibly lower)
Gunsmith Power Milling Cutters US Specifications
Technical data & information: Our special 65 shoulder sight base cutter designed to cut dovetails for both standard colt factory and mil-spec 1911 autos, and for replacement sights like wichita hi-mount, older bo- mar and others with a 65 shoulder. Some makers use a 60 dovetail on their rear sights and we also have a cutter to match them. For low-mount adjustable sights use the standard sight base cutter shown on this page. Actual cutting diameter is .330" so more than one pass will be required to install most sights. This is done on purpose to allow for factory variations in base width as well as milling tolerances. Caution: for use in milling machine only. Solid carbide cutter resists wear when cutting pistol mfg: brownells. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 080-621-066.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Cryo Treated Dovetail Cutter 65Β° X .300" US Specifications
USD 45.99
(Indicative price - actual current price possibly lower)
Gunsmith Power Milling Cutters US Specifications
Technical data & information: We've taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320β°f to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we've added two rings near the working end to differentiate them from our regular cutters. Do not exceed 700 rpm or cutters will break. Mfg: brownells specs: cryo-treated, high-speed steel. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 080-000-279.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Cryo Treated Dovetail Cutter 65Β° X .330" US Specifications
USD 41.99
(Indicative price - actual current price possibly lower)
Gunsmith Power Milling Cutters US Specifications
Technical data & information: We've taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320β°f to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we've added two rings near the working end to differentiate them from our regular cutters. Do not exceed 700 rpm or cutters will break. Mfg: brownells specs: cryo-treated, high-speed steel. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 080-000-275.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Solid Carbide Center Cut End Mill Cutters 7/16" End Mill US Specifications
USD 60.99
(Indicative price - actual current price possibly lower)
Gunsmith Power Milling Cutters US Specifications
Technical data & information: Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly in even tough, hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62mm). ß?" (6.35mm) dia. X .750" (19mm) long ‑cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. 7/16" (11.1mm) dia. X 1" (25.4mm) long c. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 11143750.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells High Speed Steel End Mill Cutter 3/8" End Mill US Specifications
USD 35.99
(Indicative price - actual current price possibly lower)
Gunsmith Power Milling Cutters US Specifications
Technical data & information: Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. For general purpose end milling operations in unhardened steels. ß?" through 7⁄16" sizes contain 8% cobalt for added toughness. Mfg: brownells specs: 5mm through 3⁄8" sizes have 3⁄8" dia. Shanks, β½" size has β½" dia. Shank. Overall lengths from 2-7⁄16" (6.2cm) to 3βό" (8.25cm). ß?" (6.35mm) dia. X 5⁄8" (15.8mm) long cut. 3/8" (9.5mm) dia. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 44126.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Hss Semi Auto Pistol Sight Base Cutter 60Β°hss Semi Auto Base Cutter US Specifications
USD 32.99
(Indicative price - actual current price possibly lower)
Gunsmith Power Milling Cutters US Specifications
Technical data & information: Our special 65 shoulder sight base cutter designed to cut dovetails for both standard colt factory and mil-spec 1911 autos, and for replacement sights like wichita hi-mount, older bo- mar and others with a 65 shoulder. Some makers use a 60 dovetail on their rear sights and we also have a cutter to match them. For low-mount adjustable sights use the standard sight base cutter shown on this page. Actual cutting diameter is .330" so more than one pass will be required to install most sights. This is done on purpose to allow for factory variations in base width as well as milling tolerances. Caution: for use in milling machine only. High speed steel, 2" (5cm) long, 3̺ mfg: brownells. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 080-621-331.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells 1911 Auto Hss Lo Mount Sight Base Cutter US Specifications
USD 49.99
(Indicative price - actual current price possibly lower)
Gunsmith Power Milling Cutters US Specifications
Technical data & information: These cutters are specially designed by us and made to our specifications for cutting the sight base slot required to mount the wichita and novak lo-mount 1911 auto sights. Use " carbide end mill to remove the bulk of the material (see drawing above) then make final dovetail cut. Final cut to lower rear of slide is done with an end mill and is not a part of the sight base cut. Made slightly undersized to compensate for variations in sight bases and milling tolerances on installation. With the popularity of custom 1911 auto pistols, this cutter is one that you will use frequently in your custom work. Caution: for use in milling machine only. 2" (5cm). .495" diameter cut mfg: brownells. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 080-621-495.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Solid Carbide Center Cut End Mill Cutters 5/16" End Mill US Specifications
USD 51.99
(Indicative price - actual current price possibly lower)
Gunsmith Power Milling Cutters US Specifications
Technical data & information: Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly in even tough, hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62mm). ß?" (6.35mm) dia. X .750" (19mm) long ‑cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. 7/16" (11.1mm) dia. X 1" (25.4mm) long c. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 11131250.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Carbide Sight Insert Cutter US Specifications
USD 33.99
(Indicative price - actual current price possibly lower)
Gunsmith Power Milling Cutters US Specifications
Technical data & information: We've had many requests for a small dovetail cutter that would speed up the cutting of dovetails in front sight blades when installing colored inserts. The one we've had made cuts a 1⁄4" wide dovetail, just right for sight inserts, and the finished product is very precise. Since the cutter is small, (it tapers to a diameter of .110"), you must make an initial cut with a 1⁄8" end mill (listed below). By using the end mill to remove some metal first, you'll avoid overloading the cutter and breaking it. Caution: for use in milling machine only. Solid carbide 2" (5cm) long. 1/4" (6.3cm) diameter shank. 60 shoulder. Mfg: brownells. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 080-621-246.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells High Speed Steel End Mill Cutter 1/4" End Mill US Specifications
USD 36.99
(Indicative price - actual current price possibly lower)
Gunsmith Power Milling Cutters US Specifications
Technical data & information: Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. For general purpose end milling operations in unhardened steels. ß?" through 7⁄16" sizes contain 8% cobalt for added toughness. Mfg: brownells specs: 5mm through 3⁄8" sizes have 3⁄8" dia. Shanks, β½" size has β½" dia. Shank. Overall lengths from 2-7⁄16" (6.2cm) to 3βό" (8.25cm). ß?" (6.35mm) dia. X 5⁄8" (15.8mm) long cut. 3/8" (9.5mm) dia. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 44118.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Evolution Armory .480x65 Dovetail Cutter .480x65 Dovetail Cutter US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
