Faxon Firearms Threaded Full Size Barrel For Glock17 Gen 1 4 G17 Gen 1 4 Full Size Threaded Barrel Saami 9mm Black US Specifications
|
|
Faxon Firearms Threaded Full Size Barrel For Glock17 Gen 1 4 G17 Gen 1 4 Full Size Threaded Barrel Saami 9mm Black US Specifications
Handgun Barrels by Faxon
|
Technical data & information: The faxon threaded barrel for glock 17 has been carefully engineered, meticulously machined, and exhaustively tested at faxon's cincinnati, ohio, factory to deliver top-notch performance. These barrels are machined from triple stress-relieved, gbq 4150 carbon steel for a tighter-than-oem barrel fit. As a result, the faxon threaded barrel for glock 17 gives an impressively precise lockup for greater accuracy potential. Faxon's g17 threaded barrel has conventional 1-10" twist rifling that stabilizes all 9mm projectiles, including heavy subsonic bullets, as well as economical cast lead bullets that some pistol shooters like to use for practice (a no-no in fact mfg: faxon firearms. US specification & reliable quality handgun barrels by Faxon. Part Nr: GA910N17NGQT.
Indicative Price: USD 141.55
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Kart Precision Barrel 1911 Xact Fit Barrel Kit 5" Barrel .38 Super Fits N/R US Specifications
USD 227.99
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specifications
Technical data & information: Install a precision quality barrel using just four small hand tools. The only fitting required is to adjust lockup with the two raised pads located on either side of the rear locking groove, cut the barrel hood to correct length and fit the bushing to the slide. A national match bushing is pre-fit to the barrel; has oversize o.D. For precise fitting to slide. Bottom lugs are fully finished and the correct length link installed to save hours of work. Mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. (n/r) non-ramped. (w/n) wilson/nowlin ramp. (c/p) clark/para ramp. Ramped barrels require machining of frame. Requires gunsmith fitting. Includes instructions. US specification & reliable quality handgun barrels by Kart. Part Nr: 472-000-001.
More Details : click here
SEARCH this site : click here
|
|
|
Nowlin 9mm Stainless Steel 1911 Gunsmith Barrel 5" Ramped US Specifications
USD 259.99
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specifications
Technical data & information: Triple heat treated, highest quality, super match-grade barrels deliver maximum accuracy. Groove and bore tolerances held to an amazing .0002" by electro-discharge cathode machining (ecm). Unique, pre-cut design of the top lugs requires only minor fitting to achieve maximum lug engagement. Rifling is ultra-smooth, uniform, and precise. Smoother bore boosts velocity with all barrel lengths. Angled edge on the driving band increases gas seal for reduced fouling with all types of bullets, plus longer barrel life. Short chambered, requires reaming to achieve correct headspace. Mfg: nowlin. US specification & reliable quality handgun barrels by Nowlin. Part Nr: RB95G.
More Details : click here
SEARCH this site : click here
|
|
|
Velocity Triggers Ar 15 Triggerguards Ar 15 Slotted Triggerguard Black US Specifications
USD 19.99
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specifications
Technical data & information: The velocity trigger ar-15 trigger guards are the perfect addition to your ar-15, enhancing traits of the gun over other mil-spec trigger guards usually found on factory rifles. Available in slotted, 3-hole, or solid triggerguards colors range from black, red, flat dark earth, od green, and pink these trigger guards are available in slotted or 3-hole styles in order to save weight while retaining strength and allowing for access inside the trigger guard. Solid guards are available as well. Options are available in a variety of colors, including black, red, flat dark earth, od green and pink. Mfg: velocity triggers. US specification & reliable quality handgun barrels by Velocity. Part Nr: MPCTGSB.
More Details : click here
SEARCH this site : click here
|
|
|
Storm Lake S&W M&P Pre Fit Match Grade Barrels M&P Compact 9mm 3.58" US Specifications
USD 154.99
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specifications
Technical data & information: Ready-to-install, match grade 416r stainless steel barrels with broach-cut rifling provide outstanding accuracy with both copper jacketed and lead bullets. Cnc machined to precise tolerances, then hardened to rc 40-42 for superior strength and durability. Chambered for maximum case support. Drop-in installation, may require minor modifications to fit certain models. Ported models are longer than factory barrel and have two ports on top, at the muzzle, to vent blast upward and counteract muzzle flip to help you get back on target faster. Threaded models are also longer than factory barrel and come pre-threaded to accept screw-on aftermarket compensators. Thread pitch is indicated in table; co mfg: storm lake specs: 416 stainless steel, natural, polished finish. Hardened to rc 40-42. US specification & reliable quality handgun barrels by Storm Lake. Part Nr: 34139.
More Details : click here
SEARCH this site : click here
|
|
|
Us Armament Corporation Colt 1903 Barrel .32 Acp US Specifications
USD 128.99
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specifications
Technical data & information: Built to original factory specifications, this reproduction colt 1903 replacement barrel will fit all late-production types 3-5 and u.S. Armament's reproduction 1903 general officer's pocket pistol. These barrels are machined from high-grade ordnance steel using the latest technology and come in-the-white, with no markings. Even better, the colt 1903 replacement barrel is also available in a threaded model, ready to accept the latest sound suppressor, so you can enjoy shooting your classic without creating "noise pollution!" correct, original .32 acp chambering helps you preserve, or regain, your 1903's superb accuracy 6 lugs at rear, mfg: us armament corporation. US specification & reliable quality handgun barrels by US Armament. Part Nr: 19032.
More Details : click here
SEARCH this site : click here
|
|
|
Zev Technologies Match Barrels For G17 & G19 Match G17 Barrel Bronze US Specifications
USD 237.5
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specifications
Technical data & information: Zev technologies match grade drop-in glock replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416r) that was originally designed for use in match grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant. Zev match grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 ra is reached. During this process the barrels are held to a final dimension of /- 0.0002" for consistency and accuracy. The barr mfg: zev technologies. US specification & reliable quality handgun barrels by ZEV. Part Nr: BBL17DBRZ.
More Details : click here
SEARCH this site : click here
|
|
|
Silencerco S&W M&P Threaded Barrels 45acp .578x28 US Specifications
USD 149.99
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specifications
Technical data & information: Silencerco's replacement barrel for the smith &wesson m&p comes with a threaded muzzle ready for your favorite suppressor. Available in both 9mm and .45 acp for full-size s&w m&p pistols (not 5" pro series). These barrels are machined from high-grade stainless steel to factory dimensions for an easy, drop-in fit to your m&p. Muzzle threads are compatible with the most popular silencers for each caliber. 9x19mm model: 1-10" rh rifling, β½"-28 threads .45 acp model: 1-16" rh rifling, .578"-28 threads 416r stainless steel the silencerco s&w m&p threaded replacement barrel easily turns your factory m&am mfg: silencerco. US specification & reliable quality handgun barrels by Silencerco. Part Nr: AC2024.
More Details : click here
SEARCH this site : click here
|
|
|
Agency Arms Non Threaded Mid Line Barrel G19 Stainless Steel US Specifications
USD 200
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specifications
Technical data & information: The agency arms non-threaded mid line barrel brings glock g19 pistols to a new level of quality with a number of heightened features. The agency arms non-threaded mid line barrel features construction utilizing 416r stainless, improving the corrosion-resistant qualities of the gun over the glock oem barrel. Rifled using a pulled broach barrel twist rate of 1:10 barrel measures 4.02 inches in length stainless steel finish the agency arms non-threaded mid line barrel also features a number of cosmetic qualities, such as a natural steel finish and machined gear flutes. Mfg: agency arms llc. US specification & reliable quality handgun barrels by Agency. Part Nr: NT2G19SS.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tactical Specialties Inc Gunsmith Fit 40 9 Conversion Barrel For S&W M&P 5.00" US Specifications
USD 189.99
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specifications
Technical data & information: The apex tactical gunsmith fit 40-9 conversion barrel for the s&w m&p does exactly what the name says it does: converts your m&p40 to shoot 9mm luger ammo. These stainless steel barrels are designed to deliver exceptional accuracy, and so also as the name indicates, they require gunsmithing for proper fit to ensure the best possible lockup. When properly installed in a properly functioning s&w m&p, an apex tactical gunsmith fit 40-9 conversion barrel is capable of producing 1" groups at 25 yards (from a mechanical rest). 9mm m&p magazine is required to complete the conversion (not included) fits all m&p40 pistols, including the m&p 2 mfg: apex tactical specialties inc. US specification & reliable quality handgun barrels by Apex. Part Nr: 105054.
More Details : click here
SEARCH this site : click here
|
|
|
Agency Arms Threaded Mid Line Barrel G19 Stainless Steel US Specifications
USD 210
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specifications
Technical data & information: The agency arms threaded mid line barrel adds a number of capabilities to any glock g19 pistol, including providing sound-suppression capabilities using a number of silencers. The agency arms threaded mid line barrel incorporates 416r stainless into its construction, providing users with heightened resistance to both corrosion and excess wear. Barrel rifled using a broach features twist rate of 1:10 includes 1/2"x28 tpi threaded muzzle stainless steel finish the agency arms threaded mid line barrel also has a number of attractive features, including gear flutes along the outside of the barrel, as well as a plain steel finish. Mfg: agency arms llc. US specification & reliable quality handgun barrels by Agency. Part Nr: T2G19SS.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Faxon Firearms Threaded Full Size Barrel For Glock17 Gen 1 4 G17 Gen 1 4 Full Size Threaded Barrel Saami 9mm Black US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
|
