Gun Optics Mount Sets US Specifications
| Page 9
|
|
|
 Leupold Mark 4 Integral Mounting System 1 Ring Insert Matte US Specifications
USD 93.99
(Indicative price - actual current price possibly lower)
Technical data & information: Designed for the precision ar-15 shooter, leupold's ims optic mounts clamp directly to a mil-std 1913 picatinny flattop rail to raise the scope and push it forward, eliminating the need for separate risers or specialized short eye relief optics. Slides into place and secures with steel crossbolts that hold tight. Aluminum, hardcoat anodized finish, matte black. The versatile mark 4 integral mounting system gives you maximum adaptability with modular components, each sold separately. The mark 4 base clamps securely to the rifle's flattop rail with a pair of hex head crossbolts and accepts the 1" or 30mm scope ring insert. The ring insert unit contains both scope rings mfg: leupold specs: aluminum, hardcoat anodized, matte black. Steel crossbolts. 5ß?" (14.6cm) long. US specification & reliable quality gun optics mount sets by Leupold. Part Nr: 110294.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Savage With Accutrigger 1" Low Scope Mount US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 930725.
More Details : click here
SEARCH this site : click here
|
|
|
Bkl Technologies 200 Seroes 1" Scope Rings 1" Offset Dovetail Rings Silver US Specifications
USD 35.95
(Indicative price - actual current price possibly lower)
Technical data & information: Aircraft-grade aluminum scope rings feature self-adjusting clamping legs that fit 3⁄8" or european 11mm dovetail mounts found on many bolt-action rimfire rifles. Each leg moves equally as the clamping screws are tightened to keep the scope centered on the rail. Clamping screws also fit into pre-drilled holes to equally spread the legs to easily slip over oversized rails. 200 series fits 1" scopes and 300 series fits 30mm scopes. Available as a one-piece cantilever mount with a 2.4" offset, a pair of scope rings, or as a pair of one standard and one offset ring with a 1.3" offset. Ring pairs available as either single, or double top strap. Single-strap rings measure mfg: bkl technologies. US specification & reliable quality gun optics mount sets by BKL. Part Nr: BKL274S.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 35mm Isms Mount 139mm Mounting Length 0 Moa US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP5001.
More Details : click here
SEARCH this site : click here
|
|
|
Vortex Optics Sport Cantilever Mounts 1" Tube 2" Offset Cantilever Ring Mount US Specifications
USD 89.99
(Indicative price - actual current price possibly lower)
Technical data & information: Use these cantilever mounts for mounting magnified optics onto flattop ar style rifles. The 2" and 3" offset of these cantilever mounts position the scope further forward, allowing the correct eye relief and head placement on ar style rifles. Aluminum construction. The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces. Mfg: vortex optics. US specification & reliable quality gun optics mount sets by Vortex. Part Nr: CM102.
More Details : click here
SEARCH this site : click here
|
|
|
Nikon Ar 15/M16 M 223 Scope Mount Ar Style Mount Realtree Max 1 US Specifications
USD 119.95
(Indicative price - actual current price possibly lower)
Technical data & information: The nikon p-series scope mount offers ar-15 owners a wide range of flexibility in their optics mounting, enabling them to select two different mounting points for front and rear rings, unlike one-piece optics mounts. The nikon p-series scope mount uses a two-piece reversible design, which allows for use with a wide range of optics. The mounts can also be positioned at different points on the rail for added flexibility. Features flat-dark earth finish or black finish height: 1.4 inches fits 1-inch diameter tubes designed for use with picatinny rails the nikon p-series scope mount also allows the charging handle on ar rifles to remain accessible. Mfg: nikon specs: aluminum, hardcoat anodized, matte black (mb), realtree max-1 (max) or mossy oak brush (brush) camouflage. Steel mounting hardware, black oxide finish. 5" (12.7cm) o.A.L. 3ß½" (8.9cm) center-to-center ring spacing; 3.125" (8cm) between ring edges. Requir. US specification & reliable quality gun optics mount sets by Nikon. Part Nr: 837.
More Details : click here
SEARCH this site : click here
|
|
|
Burris Ar Pepr Permanent Mounts 1" Ar Pepr Mount US Specifications
USD 89.99
(Indicative price - actual current price possibly lower)
Technical data & information: One-piece cantilever mount with integral rings positions the optic almost 2" farther forward to provide extra clearance needed for a night vision device (nvd), add-on magnifier, or long eye relief scope. The "proper eye position ready" mount also features built-in, two-slot rails on the tops of the rings for convenient mounting of reflex sights or other accessories. Each top ring strap is secured with six torx screws to prevent recoil-induced slippage. Side locking bar with two, steel hex nuts and cross-bolts hold tight on any picatinny receiver rail. Smooth contours and radiused edges give a streamlined appearance, reduce weight, and prevent snagging. Mfg: burris specs: aluminum, hardcoat anodized, matte black. 5.3" (13.5cm) long, 1.6" (4.1cm) wide, 2.4" (6.1cm) overall height. Height from top of rail to bottom of ring: 1" (2.5cm). 8.7 oz. (247g) weight. Fits scopes with 1" tube. Mounts to mil-std 1913 picatinny rails. US specification & reliable quality gun optics mount sets by Burris. Part Nr: 410343.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 34mm Isms Mount 121mm Mounting Length 30 Moa US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP4902.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Mark 6 Ims 34mm Mount 34mm Right Hand Matte Black US Specifications
USD 278.99
(Indicative price - actual current price possibly lower)
Technical data & information: The leupold mark 6 ims 34mm mount offers a simple and durable solution for mounting a 34mm optic on your favorite ar rifle. Made from sturdy bar stock, these bases will fit perfectly and can withstand years of hard use. Integral rings and bases mount directly to your mil-spec 1913/picatinny rail eliminates the need to add risers or use short eye relief optics mark one location on the rail before removal and you can instantly return to zero serious ar shooters demand products like the leupold mark 6 ims 34mm mount because the integral design provides the most durable platform yet it can be removed quickly and easily as needed. Plus, this product is backed by leupo mfg: leupold. US specification & reliable quality gun optics mount sets by Leupold. Part Nr: 120303.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 34mm Isms Mount 121mm Mounting Length 20.6 Moa US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP4601.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Mark 8 Ims Mounting System Mark 8 Ims 34mm Mounting System Matte US Specifications
USD 434.99
(Indicative price - actual current price possibly lower)
Technical data & information: The leupold integral mounting systems (ims) family quickly and easily eliminates the two most common issues faced when mounting standard riflescopes to ar-style rifles; scope height and eye relief. From the mark 1 to the mark 4, each aluminum ims cantilever design mounts directly to the firearm's mil-spec 1913/picatinny to raise the scope and push it forward, eliminating the need for risers or specialized optics with shortened eye relief. Mfg: leupold. US specification & reliable quality gun optics mount sets by Leupold. Part Nr: 110296.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Mark 4 Ims 30mm Mount 30mm Matte Black US Specifications
USD 156.99
(Indicative price - actual current price possibly lower)
Technical data & information: The leupold mark 4 ims 30mm mount is built from durable bar stock and provides a solid platform for mounting an optic on your ar. The ims (integral mounting system) locks securely onto the mil-spec 1913/picatinny rail of your rifle and can be removed and remounted without rezeroing. Specially-designed integral bases eliminate the need for risers no eye-relief issues; eliminates the need for short eye relief scopes simply mark one location on your rail for rapid remounting and an instant return to zero with the leupold mark 4 ims 30mm mount your ar rifle becomes even more versatile than before. In addition, these integral bases and rings are backed by leupold&rsqu mfg: leupold. US specification & reliable quality gun optics mount sets by Leupold. Part Nr: 171986.
More Details : click here
SEARCH this site : click here
|
|
|
Weaver See Thru Mounts Fits Marlin 336 Blue Finish US Specifications
USD 23.99
(Indicative price - actual current price possibly lower)
Technical data & information: Extra wide oval opening below the scope allows fast, unrestricted use of iron sights when you're too close to use a scope. All steel, four screw top strap gives 210β° surface contact for recoil-proof strength. Integral aluminum base means lighter weight. Mfg: weaver specs: 1" (2.5cm) i.D. Overall height approximately 2" (5.1cm). 3 oz. (85g) per pair. Aluminum lower half, steel cap and screws. Satin blue or brushed stainless finish. US specification & reliable quality gun optics mount sets by Weaver. Part Nr: 49713.
More Details : click here
SEARCH this site : click here
|
|
|
Geissele Automatics Super Precision Ar 15 Extended Mounts 30mm 0 Moa Extended Ar 154/M4 Mount Matte Black US Specifications
USD 325
(Indicative price - actual current price possibly lower)
Technical data & information: The geissele ar-15/m4 super precision series of scope mounts are optimized for use with an ar-15/m4 upper. The mounting surface spans 7 picatinny sections and utilizes 4 shear lugs. These mounts use geissele's update of the classic nut and bolt method for clamping the mount to the picatinny rail, which is the most secure method of attaching your scope to your weapon. Each nut and bolt combination provides 1,400 pounds of clamping force, much more than any lever mounting arrangement. The geissele super precision mounts are available in 7075-t6 high strength aluminum. To create a mount with the best possible return to zero geissele machines the entire mount from a single piece of mfg: geissele automatics llc. US specification & reliable quality gun optics mount sets by Geissele. Part Nr: 05381B.
More Details : click here
SEARCH this site : click here
|
|
|
Burris Ar Pepr Quick Detach Mounts 30mm Quick Detach Mount US Specifications
USD 109.99
(Indicative price - actual current price possibly lower)
Technical data & information: One-piece cantilever mount with integral rings positions the optic almost 2" farther forward to provide extra clearance needed for a night vision device (nvd), add-on magnifier, or long eye relief scope. The "proper eye position ready" mount also features built-in, two-slot rails on the tops of the rings for convenient mounting of reflex sights or other accessories. Each top ring strap is secured with six torx screws to prevent recoil-induced slippage. Side locking bar with two, steel hex nuts and cross-bolts hold tight on any picatinny receiver rail. Also available with quick-release lever attachment system. Mfg: burris specs: aluminum, hardcoat anodized, matte black. 5.3" (13.5cm) long, 1.6" (4.1cm) wide, 2.4" (6.1cm) overall height. Height from top of rail to bottom of ring: 1" (2.5cm). 8.7 oz. (247g) weight. Fits scopes with 1" tube. Mounts to mil-std 1913 picatinny rails. US specification & reliable quality gun optics mount sets by Burris. Part Nr: 410342.
More Details : click here
SEARCH this site : click here
|
|
|
Zro Delta Dloc Hamr Optic Mount US Specifications
USD 121.99
(Indicative price - actual current price possibly lower)
Technical data & information: Sporting a spring-loaded clamping side bar and three crossbolts that also serve as recoil lugs, the zrodelta's dloc mount for the leupold hamr grabs on to your flattop receiver like a long lost lover. The dloc-hamr is simple to attach: just loosen the large hex nut, push the clamping bar out, and since it's under spring tension, let it snap on your top rail. Then just tighten the screw by hand for a solid yet quick-detachable installation, or grab a wrench and tighten the nut to spec for a non-qd installation. Quick attach/detach without loss of optic's zero positions bottom of hamr .222" above rail adjustment knob permits hand-tightening wi mfg: zro delta. US specification & reliable quality gun optics mount sets by ZRO Delta. Part Nr: 7.023E+11.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Mauser 98 Large Ring 1" Low Scope Mount US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 930709.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Marlin 336/1895 1" Low Scope Mount US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 930336.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Savage With Accutrigger 1" High Scope Mount US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 950725.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 34mm Isms Mount 121mm Mounting Length 20.6 Moa Type SP4602 US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP4602.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Lr Skel Extended Skeletonized Msr Mounts 30mm X Skel Mount 20 Moa Tactical Gray US Specifications
USD 117.59
(Indicative price - actual current price possibly lower)
Technical data & information: The lr-skel mount offers 20 moa built-in slope for long range precision shooting. This allows additional elevation adjustment in your optic when shooting ranges over 600 yards. The lr-skel mount is cnc precision machined from 6061 aluminum and warne has been able to reduce the weight by over 30%, compared to our r.A.M.P. Mount by utilizing a skeletonized body and ring caps. The lr-skel provides an additional inch of forward cantilever, compared to the original skel mount to provide proper eye relief when using scopes with large eye boxes and gives extra space behind the mount for accessories like the warne a645 45β° side mount adapter. Mfg: warne mfg. Company. US specification & reliable quality gun optics mount sets by Warne. Part Nr: LRSKEL30TG.
More Details : click here
SEARCH this site : click here
|
|
|
M & A Parts Ar 15/M16 Flattop Scope Mount 1" US Specifications
USD 53.99
(Indicative price - actual current price possibly lower)
Technical data & information: One-piece mount provides strong, secure scope attachment that withstands the bumps and knocks of hard tactical use. Positions scope well above flattop receiver for easy heads-up aiming. Each ring is 11/8" long for maximum contact with scope body, and caps have four hex head clamping screws for recoil-proof holding power. Two, steel, thumb screws and full-length clamping bar securely lock mount to picatinny receiver rail. Rounded contours and radiused edges resist snagging on other gear. Machined aluminum keeps weight to a minimum. Models available to fit 1" and 30mm scope bodies. Mfg: m & a parts specs: aluminum, hardcoat anodized, black, matte finish. 5-1/8" (13cm) o.A.L. Height measured from top of rail to bottom of ring. 1", 1.18" (2.99cm) high, 10.7 oz. (303g) weight; 30mm, 1.14" (2.89cm); 10 oz. (283.5g) weight. US specification & reliable quality gun optics mount sets by M&A. Part Nr: 553-000-005.
More Details : click here
SEARCH this site : click here
|
|
|
Rs Regulate Ak47/Akm Optic Mount System Akml Aimpoint Micro Upper Mount US Specifications
USD 65
(Indicative price - actual current price possibly lower)
Technical data & information: Updated design allows for customization of the mounting platform. Option of three different lower mounts, with a full length lower rail, forward rail and rear rail. Placement of lower rail allows for optics to be positioned in the ideal location front to back, as well as right to left. Lightweight cnc machined aircraft grade 6061 t6 aluminum. Position optics in co-witness location. Allows field stripping of the rifle without removal of the optic on most ak variants. Redesigned thumb lever lock retains zero even after repeated optic removal and reinstallation. Ability to stake position for extreme duty. Akml allows the mounting of the aimpoint t-1 and h-1 micro red dot optics mfg: rs regulate specs: 6061 t6 aluminum, matte black teflon coated finish. Accepts optics with 30mm od tube. Fits ak and akm rifles equipped with receiver side mount base dovetail. Base not included. US specification & reliable quality gun optics mount sets by RS. Part Nr: AKML.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gun Optics Mount Sets US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
