Gunsmith Punches US Specifications
| Page 3
|
|
|
 Grace Usa Ps 8 Grace Brass Punch Set US Specifications
USD 33.99
(Indicative price - actual current price possibly lower)
Technical data & information: Punches are machined from solid brass hex stock with a flat head and extra-long shaft to drive pins completely out. Brass is softer than steel, so it won't gouge the gun if you slip. Standard flathead punches (excellent for drifting sights. Contains the following 8 sizes: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", βό", 5⁄16" dia. All punches are 3β½" long. Mfg: grace usa. US specification & reliable quality gunsmith punches by Grace. Part Nr: PS8.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Premium Roll Pin Starter Punches 5/32" Roll Pin Starter Punch US Specifications
USD 3.99
(Indicative price - actual current price possibly lower)
Technical data & information: Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Mfg: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 532SRSB.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Premium Roll Pin Starter Punches 5/64" Roll Pin Starter Punch US Specifications
USD 6.99
(Indicative price - actual current price possibly lower)
Technical data & information: Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Mfg: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 564SRSB.
More Details : click here
SEARCH this site : click here
|
|
|
Starrett #565 Pin Punch Set Starrett Pin Punch 1/4" US Specifications
USD 7.99
(Indicative price - actual current price possibly lower)
Technical data & information: Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area; individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Mfg: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32 (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), βό" (6.3mm) and 5/16" (7.9mm). US specification & reliable quality gunsmith punches by Starrett. Part Nr: 52584.
More Details : click here
SEARCH this site : click here
|
|
|
Grace Usa Starter Punches 3/32" (2.4mm) Starter Brass Punch US Specifications
USD 7.99
(Indicative price - actual current price possibly lower)
Technical data & information: For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Starter punch set includes 4 flathead, tapered punches for drifting sights and driving pins flush. Includes plastic storage pouch for easy access. Punches also available separately. Mfg: grace usa specs: starter punch set, 4 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32" dia. US specification & reliable quality gunsmith punches by Grace. Part Nr: BSP332.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Dovetail Sight Punch Dovetail Front Sight Punch US Specifications
USD 9.99
(Indicative price - actual current price possibly lower)
Technical data & information: These punches are specifically designed for the installation, removal, and adjustment of front and rear handgun sights. Made of brass so they will not mar the sight or the gun if you slip. Unique triangular punch faces and heavy-duty bodies make them indispensable working tools for the gunsmith. Can be re-ground to square up the flat after multiple uses. Front sight punch has a base width of approximately .280"; rear sight punch has a base width of approximately 0.480". They are sold separately or can be purchased together in a handy kit. The small dovetail sight punch (sold separately) has a .230" base width, making it ideal for front and rear sights on compact handguns. Mfg: brownells. US specification & reliable quality gunsmith punches by Brownells. Part Nr: DTFSP.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Cup Tip Punches Set D US Specifications
USD 128.34
(Indicative price - actual current price possibly lower)
Technical data & information: Eight concave "cupped" tip punches to precisely fit the round head pins found on smith & wesson handguns. Won't flatten the pin top and ruin the gun's looks. Made to the same specs as those used by the factory. Use 3mm punch on sig handguns. Complete set (set d listed below) includes a delrin bench block that holds and organizes all eight punches. Bench block also available separately 080-000-644. Mfg: brownells specs: punches, steel. 5/16" (7.9mm) wide hex handle. .057" (1.44mm)/long; .066" (1.7mm)/long; .072" (1.8mm/long; .040" (1mm)/short; .050" (1.3mm)/short; .050" (1.3mm)/long; 3mm (.118")/long; 3mm (.118")/short. Bench bl. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-000-645.
More Details : click here
SEARCH this site : click here
|
|
|
Lyman Deluxe Hammer & Punch Set Hammer Punch Set US Specifications
USD 53.99
(Indicative price - actual current price possibly lower)
Technical data & information: Compact set of popular sized punches, with hammer, stores in its own bench block for quick access. Combination brass/nylon hammer has machine knurled handle for positive grip. 4130 steel punches. Mfg: lyman specs: set includes 1/16" (1.5mm), 3/32" (2.3mm), 1/8" (3.1mm), 5/32" (3.9mm), 3/16" (4.7mm) diameter pin punches, 1/8" center punch, 3/16" diameter brass drift. Brass/nylon face hammer, 8" (20cm) overall length, hardwood storage block. US specification & reliable quality gunsmith punches by Lyman. Part Nr: 7031298.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Starter Punch Set Replaceable Starter Punch .039 Dia. US Specifications
USD 9.99
(Indicative price - actual current price possibly lower)
Technical data & information: We are constantly encouraging you to always use starting punches to break tight pins loose, then use a "drift" or pin-punch to drive the pin the rest of the way out. This saves bending pin punches, but much more importantly, it prevents fine guns from getting pin punch mars should the pin punch bend and slip, or, break, and scratch. To bring you the best possible starter punches, we have had special, short replaceable pins made up to fit our famous gunsmith's replacement punch set handles. Their regular use will definitely improve your production . . . And your professionalism! mfg: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins 1" (2.5cm) long. Set includes 3 punches and three pins. Replacement pin sizes: .039" (.99mm) for 3⁄64" (1.2mm) diameter pins. .060" (1.5mm) for 1⁄16" (1.6mm) diameter pins; .091" (2.3mm) for 3⁄32" (2.4mm) diameter pins. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-513-039.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Gunsmith Replaceable Pin Punch Set Replacement Pins 2"x.039" US Specifications
USD 14.99
(Indicative price - actual current price possibly lower)
Technical data & information: Finally! what we think is the answer to the pin punch headache that has plagued us, and every other gunsmith who has ever knocked out a gun pin, had the punch break or bend, and been out of business until a new one could be made or ordered. Now, just replace the tip!handles, with removable knurled-chuck to hold punch, are made of powerful, fatigueproof c.R.S. Steel, tensile strength of over 140,000 psi (min.). Replaceable punch, the secret of the tool. These are special, tool steel, bevel-headed punches designed for the tool, die and mold manufacturers as perforators, punches, ejectors and core pins. Oil hardened to rc 58-60. Heads are annealed to rc 42-45. They come in two lengths a mfg: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins are 2" (5.1cm) or 2β½" (6.3cm) long. Replacement pin punch sets include the following pin sizes: 0.039", 0.060", and 0.091" in either 2" or 2 β½" lengths. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-509-639.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Hole Center Punches Set US Specifications
USD 21.99
(Indicative price - actual current price possibly lower)
Technical data & information: 3 special center punches with outside diameters (o.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and hole center-to-center spacing problems. To use: level gun in vise or scope mounting jig, position and level sight, rib or base, and clamp in place. Place correct size punch in hole and lightly tap with a 4-oz. Hammer. Remove base; drill and tap first hole; re-install base and check positioning. If everything is "square", re-clamp and finish other holes. Mfg: brownells specs: 2-βύ" (7.0cm) long. ß?" (6.3cm) dia. Knurled handle. Hardened, tool steel. Set contains one of each size. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-732-000.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Premium Roll Pin Punches 5/64" Roll Pin Punch US Specifications
USD 6.99
(Indicative price - actual current price possibly lower)
Technical data & information: Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Mfg: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 564RSB.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Alignment & Push Punches Set Of Four Steel Punches US Specifications
USD 35.99
(Indicative price - actual current price possibly lower)
Technical data & information: For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the ar-15, 1911 auto, remington 870 and ruger revolvers. Won't roll off bench. Alignment/push punch set includes one each of the punches liste mfg: brownells specs: handle, plastic. Shank, unhardened steel drill rod, or 360 alloy brass . 3ß?" (8.2cm) long. Oal, 4βύ" (12.1cm) long. Alignment/push punch set, contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092" (2.3mm), .120" (3mm). US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-000-034.
More Details : click here
SEARCH this site : click here
|
|
|
Mayhew Steel Mini Punches 5/64" Mini Punch US Specifications
USD 5.99
(Indicative price - actual current price possibly lower)
Technical data & information: These three small diameter punches give excellent control because of their short length. Ideal when doing small, precision work or in tight spots where a full length punch just won't fit. Forged, one-piece construction with knurled handle. Mfg: mayhew steel specs: 2βύ" (7cm) overall. ß?" (19mm) punch section. Steel. US specification & reliable quality gunsmith punches by Mayhew. Part Nr: 21601.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Roll Pin Holders 3.5mm (.138") Dia 5"(12.7cm) O/A Length US Specifications
USD 14.99
(Indicative price - actual current price possibly lower)
Technical data & information: Holds roll pins perfectly aligned for starting correctly. Especially good on the tiny, tough-to-grab ones, or those in tight places. 1/16" is notched to clear m16/ar-15 rear sight. 3.5mm excellent for holding the pin that retains the breech block on sig handguns. Finish driving with roll pin punch. O/a in chart means "overall". Available individually or as a set of 5. Mfg: brownells specs: steel, knurled handle. Set of 5. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-685-130.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Premium Roll Pin Starter Punches 7/32" Roll Pin Starter Punch US Specifications
USD 3.99
(Indicative price - actual current price possibly lower)
Technical data & information: Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Mfg: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 732SRSB.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Gunsmith Replaceable Pin Punch Set Replacement Pins 2"x.091" US Specifications
USD 14.99
(Indicative price - actual current price possibly lower)
Technical data & information: Finally! what we think is the answer to the pin punch headache that has plagued us, and every other gunsmith who has ever knocked out a gun pin, had the punch break or bend, and been out of business until a new one could be made or ordered. Now, just replace the tip!handles, with removable knurled-chuck to hold punch, are made of powerful, fatigueproof c.R.S. Steel, tensile strength of over 140,000 psi (min.). Replaceable punch, the secret of the tool. These are special, tool steel, bevel-headed punches designed for the tool, die and mold manufacturers as perforators, punches, ejectors and core pins. Oil hardened to rc 58-60. Heads are annealed to rc 42-45. They come in two lengths a mfg: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins are 2" (5.1cm) or 2β½" (6.3cm) long. Replacement pin punch sets include the following pin sizes: 0.039", 0.060", and 0.091" in either 2" or 2 β½" lengths. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-509-691.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Roll Pin Starter Punches #6 Punch US Specifications
USD 3.99
(Indicative price - actual current price possibly lower)
Technical data & information: Start the removal of roll or spring pins without causing damage to the pins or the punch. Short shaft starter punch gives you more control by putting your hand closer to the pin and keeps you from bending longer finishing roll pin punches. Made from solid steel, with parallel-ground shanks and knurled handles. Mfg: brownells specs: steel, black. Kit contains one each of seven sizes: #1, 1/16" (1.6mm); #2, 5/64" (2mm); #3, 3/32" (2.4mm), #4, 1/8" (3.2mm); #5, 5/32" (4mm); #6, 3/16" (4.8mm); 7/32" (5.5mm); #7, 7/32" (5.5mm). US specification & reliable quality gunsmith punches by Brownells. Part Nr: 25035939.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Nylon/Brass Drift Punch 1/4" Aluminum Punch Tip US Specifications
USD 4.99
(Indicative price - actual current price possibly lower)
Technical data & information: Great combination punch for gunsmith, machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: 5/16" nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action; brass in various diameters for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Aluminum in two diamters for harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington shotgun punch tip which is .165" di mfg: brownells specs: handle is 3" (7.6cm) long x 3.8" (9.5mm) diamter. Tips are 1βό" (3.2cm) long. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-475-005.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Brass Punch Set US Specifications
USD 119.99
(Indicative price - actual current price possibly lower)
Technical data & information: Precision machined, non-marring brass punches drift sights and drive pins without risk of damage to the sight, pin, or firearm. We combined 20 of our most popular non-marring brass punches, added a compact bench block and came up with a great addition for the work bench. Features (4) starter punches, (8) roll pin punches, and (8) standard punches for a variety of different jobs. Delrin bench block holds and organizes all 20 punches for easy access, plus is resistant to most solvents. Starter punches are used to start the removal of steel or aluminum pins. Short, tapered shaft is extra stiff to prevent bending and twisting. Roll pin punches feature a special tip that centers inside the h mfg: brownells specs: brass. Starter punches, contains (1) of each diameter: 1⁄16" (1.6mm), 3⁄32" (2.4mm), 1⁄8" (3.2mm), 5⁄32" (4mm). Roll pin punches, contains (1) of each diameter: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16". US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-000-649.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Roll Pin Starter Punches Kit US Specifications
USD 34.99
(Indicative price - actual current price possibly lower)
Technical data & information: Start the removal of roll or spring pins without causing damage to the pins or the punch. Short shaft starter punch gives you more control by putting your hand closer to the pin and keeps you from bending longer finishing roll pin punches. Made from solid steel, with parallel-ground shanks and knurled handles. Mfg: brownells specs: steel, black. Kit contains one each of seven sizes: #1, 1/16" (1.6mm); #2, 5/64" (2mm); #3, 3/32" (2.4mm), #4, 1/8" (3.2mm); #5, 5/32" (4mm); #6, 3/16" (4.8mm); 7/32" (5.5mm); #7, 7/32" (5.5mm). US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-000-241.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gunsmith Punches US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
