Gunsmith Punches US Specifications
| Page 7
|
|
|
 Brownells Premium Roll Pin Punches 5/64" Roll Pin Punch US Specifications
USD 6.99
(Indicative price - actual current price possibly lower)
Technical data & information: Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Mfg: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 564RSB.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Cup Tip Punches Model 2 .066" (1.7mm) Diameter/Long Length US Specifications
USD 17.99
(Indicative price - actual current price possibly lower)
Technical data & information: Eight concave "cupped" tip punches to precisely fit the round head pins found on smith & wesson handguns. Won't flatten the pin top and ruin the gun's looks. Made to the same specs as those used by the factory. Use 3mm punch on sig handguns. Complete set (set d listed below) includes a delrin bench block that holds and organizes all eight punches. Bench block also available separately 080-000-644. Mfg: brownells specs: punches, steel. 5/16" (7.9mm) wide hex handle. .057" (1.44mm)/long; .066" (1.7mm)/long; .072" (1.8mm/long; .040" (1mm)/short; .050" (1.3mm)/short; .050" (1.3mm)/long; 3mm (.118")/long; 3mm (.118")/short. Bench bl. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-620-002.
More Details : click here
SEARCH this site : click here
|
|
|
Starrett #565 Pin Punch Set Starrett Pin Punch 3/32" US Specifications
USD 8.99
(Indicative price - actual current price possibly lower)
Technical data & information: Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area; individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Mfg: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), βό" (6.3mm) and 5/16" (7.9mm). US specification & reliable quality gunsmith punches by Starrett. Part Nr: 52579.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Premium Roll Pin Punches Kit US Specifications
USD 34.99
(Indicative price - actual current price possibly lower)
Technical data & information: Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Mfg: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 7ROLLPINKIT.
More Details : click here
SEARCH this site : click here
|
|
|
Geissele Automatics Roll Pin Tool For Gas Block US Specifications
USD 12.5
(Indicative price - actual current price possibly lower)
Technical data & information: Ingenious tool holds the tiny gas tube roll pin securely to make installation easy and fast. No more fumbling with needle nose pliers or tweezers, only to have the pin fly fly off and get lost! pin is pressed into the tool for a rock-solid hold while the tapered tip enables precise control and correct placement. Safely gets the pin partially in, so the job can be finished with a normal roll pin punch. All-steel construction, matte black oxide finish. Mfg: geissele automatics llc. US specification & reliable quality gunsmith punches by Geissele. Part Nr: 10225.
More Details : click here
SEARCH this site : click here
|
|
|
Lyman Deluxe Punch Set Roll Pin Punch Set US Specifications
USD 16.99
(Indicative price - actual current price possibly lower)
Technical data & information: Remove and replace hollow split roll pins easily and safely using these special-built round-nose punches. The round tip locks into the pin to keep the punch from slipping and damaging receivers, trigger assemblies, and other fragile mechanisms. Machined knurling also helps you maintain a secure grip and retain control of the punch. Made of through-hardened 4140 steel for maximum strength and years of dependable service. Mfg: lyman specs: 4140 chrome-moly steel. Set of 4 punches, approximately 4" (10.2cm) long, in 1⁄16" (1.6mm), 3⁄32" (2.4mm), 1⁄8" (3.2mm), and 5⁄32" (4mm) diameters. US specification & reliable quality gunsmith punches by Lyman. Part Nr: 7031277.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Alignment & Push Punches Alignment/Push Punch Set US Specifications
USD 60.95
(Indicative price - actual current price possibly lower)
Technical data & information: For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the ar-15, 1911 auto, remington 870 and ruger revolvers. Won't roll off bench. Alignment/push punch set includes one each of the punches liste mfg: brownells specs: handle, plastic. Shank, unhardened steel drill rod, or 360 alloy brass . 3ß?" (8.2cm) long. Oal, 4βύ" (12.1cm) long. Alignment/push punch set, contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter: .092" (2.3mm), .120" (3mm). US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-000-647.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Nylon Front Sight Drift Punch Nylon Drift Punches US Specifications
USD 5.99
(Indicative price - actual current price possibly lower)
Technical data & information: This handy little punch is made for just one purpose . . . To drive the front sight in or out without marring it or the barrel. We first tried brass, but as you know, it leaves a "brass tracking" wherever it rubs. We then tried fiber, but after a few hard blows it shatters. Nylon doesn't mark the barrel or sight, nor does it shatter or lose its shape after hard and prolonged use. Mfg: brownells specs: 4" (10.2cm) long. 5/16" (7.9mm) diameter. Polyenco nylon. Sold in a set of 3. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-478-000.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Nylon/Brass Drift Punch Nylon Punch US Specifications
USD 6.99
(Indicative price - actual current price possibly lower)
Technical data & information: Great combination punch for gunsmith, machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: 5/16" nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action; brass in various diameters for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Aluminum in two diamters for harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington shotgun punch tip which is .165" di mfg: brownells specs: handle is 3" (7.6cm) long x 3.8" (9.5mm) diamter. Tips are 1βό" (3.2cm) long. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-001-223.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Premium Roll Pin Holders 3/32" Diameter Roll Pin Holder US Specifications
USD 7.99
(Indicative price - actual current price possibly lower)
Technical data & information: Brownells roll spring (pin) holders are accurately drilled to hold tiny roll springs so perfect alignment is obtained. The 1/16" roll spring (pin) holder is notched to clear m16/ar-15 rear sights. The 3.5mm is excellent for holding the pin that retains the breech block on sig handguns. This fine set has sizes 1/16" (notched), 5/64", 3/32", 1/8", 3.5mm and each made from 5/16" hex high carbon 5160 steel that is bainite heat treated for strength. Single groove in grip section and laser marked for quick identification. 100% made in the usa. Mfg: brownells. US specification & reliable quality gunsmith punches by Brownells. Part Nr: B332RSH.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Roll Pin Punches #6 Roll Pin Punch US Specifications
USD 2.99
(Indicative price - actual current price possibly lower)
Technical data & information: With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with long, parallel-ground points and knurled section for better gripping. Mfg: brownells specs: kit includes one each of seven sizes: #1, 1/16" (1.6mm); #2, 5/64" (2.0mm); #3, 3/32" (2.4mm); #4, 1/8" (3.2mm); #5, 5/32" (4.0mm); #6, 3/16" (4.8mm); #7, 7/32" (5.5mm). US specification & reliable quality gunsmith punches by Brownells. Part Nr: 25005939.
More Details : click here
SEARCH this site : click here
|
|
|
Lyman Gunsmith Punch Set US Specifications
USD 26.99
(Indicative price - actual current price possibly lower)
Technical data & information: Quality steel punches with hardened steel punch tips and knurled steel handles. Set includes sizes 1/16, 3/32, 1/8, 5/32, and 3/16 in. Punches; 1/8 in center punch; brass drift punch; storage block. Works well in conjunction with the brass tapper above. Mfg: lyman. US specification & reliable quality gunsmith punches by Lyman. Part Nr: 7031273.
More Details : click here
SEARCH this site : click here
|
|
|
Grace Roll Pin Punch Set 8 Piece #brp 8 Brass Roll Pin Punch US Specifications
USD 33.99
(Indicative price - actual current price possibly lower)
Technical data & information: Punches are machined from solid brass hex stock with a flat head and extra-long shaft to drive pins completely out. Brass is softer than steel, so it won't gouge the gun if you slip. Available as roll pin punches that have a dimple on the working end to keep the punch centered on the pin during use. Contains the following 8 sizes: 1⁄16", 3⁄32", 1⁄8", 5⁄32, 3⁄16", 7⁄32", βό", 5⁄16" dia. All punches are 3β½" long. Mfg: grace usa. US specification & reliable quality gunsmith punches by Grace. Part Nr: BRP8.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Deluxe Punch Bench Set Pin Punch Set US Specifications
USD 105.99
(Indicative price - actual current price possibly lower)
Technical data & information: This deluxe punch set gives you a versatile selection of 20 punches to easily start, remove and install pins, align holes, plus drift and stake sights without marring the part or firearm finish. We combined alignment punches, flat tip mini punches, starter punches, a nylon drift punch, and a center and prick punch with our most popular pin punches, then added a machined delrin bench block to hold and organize them all for easy access. Punches are constructed of hardened steel with parallel-ground shanks and either knurled or hexagonal handles. The nylon drift punch is solid nylon and can be shaped for your specific application. Alignment punches feature a tapered pin with a working leng mfg: brownells specs: steel, knurled or hexagonal handle, except nylon drift punch is solid nylon. Nylon punch, contains (1), 4" (10cm) long x 5/16" (7.9mm) diameter. Alignment punches, contains (1) of each diameter: .070" (1.8mm) to .156" (4.0mm); .110" (2.8mm) to .187" (4.7m. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-000-653.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Gunsmith Replaceable Pin Punch Set Replacement Pins 2 1/2"x.091" US Specifications
USD 15.99
(Indicative price - actual current price possibly lower)
Technical data & information: Finally! what we think is the answer to the pin punch headache that has plagued us, and every other gunsmith who has ever knocked out a gun pin, had the punch break or bend, and been out of business until a new one could be made or ordered. Now, just replace the tip!handles, with removable knurled-chuck to hold punch, are made of powerful, fatigueproof c.R.S. Steel, tensile strength of over 140,000 psi (min.). Replaceable punch, the secret of the tool. These are special, tool steel, bevel-headed punches designed for the tool, die and mold manufacturers as perforators, punches, ejectors and core pins. Oil hardened to rc 58-60. Heads are annealed to rc 42-45. They come in two lengths a mfg: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins are 2" (5.1cm) or 2β½" (6.3cm) long. Replacement pin punch sets include the following pin sizes: 0.039", 0.060", and 0.091" in either 2" or 2 β½" lengths. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-510-691.
More Details : click here
SEARCH this site : click here
|
|
|
Starrett #565 Pin Punch Set Starrett Pin Punch 7/32" US Specifications
USD 7.99
(Indicative price - actual current price possibly lower)
Technical data & information: Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area; individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Mfg: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), βό" (6.3mm) and 5/16" (7.9mm). US specification & reliable quality gunsmith punches by Starrett. Part Nr: 52583.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Roll Pin Starter Punches #7 Punch US Specifications
USD 3.99
(Indicative price - actual current price possibly lower)
Technical data & information: Start the removal of roll or spring pins without causing damage to the pins or the punch. Short shaft starter punch gives you more control by putting your hand closer to the pin and keeps you from bending longer finishing roll pin punches. Made from solid steel, with parallel-ground shanks and knurled handles. Mfg: brownells specs: steel, black. Kit contains one each of seven sizes: #1, 1/16" (1.6mm); #2, 5/64" (2mm); #3, 3/32" (2.4mm), #4, 1/8" (3.2mm); #5, 5/32" (4mm); #6, 3/16" (4.8mm); 7/32" (5.5mm); #7, 7/32" (5.5mm). US specification & reliable quality gunsmith punches by Brownells. Part Nr: 25036939.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Cup Tip Punches Model 7 3mm (.118") Diameter/Long Length US Specifications
USD 12.99
(Indicative price - actual current price possibly lower)
Technical data & information: Eight concave "cupped" tip punches to precisely fit the round head pins found on smith & wesson handguns. Won't flatten the pin top and ruin the gun's looks. Made to the same specs as those used by the factory. Use 3mm punch on sig handguns. Complete set (set d listed below) includes a delrin bench block that holds and organizes all eight punches. Bench block also available separately 080-000-644. Mfg: brownells specs: punches, steel. 5/16" (7.9mm) wide hex handle. .057" (1.44mm)/long; .066" (1.7mm)/long; .072" (1.8mm/long; .040" (1mm)/short; .050" (1.3mm)/short; .050" (1.3mm)/long; 3mm (.118")/long; 3mm (.118")/short. Bench bl. US specification & reliable quality gunsmith punches by Brownells. Part Nr: SML004257.
More Details : click here
SEARCH this site : click here
|
|
|
Grace Usa Roll Pin Punches Brass Roll Pin Punch Set 8 Pc US Specifications
USD 33.99
(Indicative price - actual current price possibly lower)
Technical data & information: For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Roll pin punch set includes 8 roll pin punches with ends that fit around roll pins without drifting off. Mfg: grace usa specs: brass, 5⁄16" (7.9mm) hex stock. Punch set/roll pin punch set, 8 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", βό", 5⁄16" dia. Starter punch set, 4 punches: 1⁄16", 3⁄32. US specification & reliable quality gunsmith punches by Grace. Part Nr: BRP8.
More Details : click here
SEARCH this site : click here
|
|
|
Starrett #565 Pin Punch Set Starrett Pin Punch 5/32" US Specifications
USD 7.99
(Indicative price - actual current price possibly lower)
Technical data & information: Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area; individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Mfg: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), βό" (6.3mm) and 5/16" (7.9mm). US specification & reliable quality gunsmith punches by Starrett. Part Nr: 52581.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Nylon/Brass Drift Punch 5/16" Aluminum Punch Tip US Specifications
USD 4.99
(Indicative price - actual current price possibly lower)
Technical data & information: Great combination punch for gunsmith, machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: 5/16" nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action; brass in various diameters for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Aluminum in two diamters for harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington shotgun punch tip which is .165" di mfg: brownells specs: handle is 3" (7.6cm) long x 3.8" (9.5mm) diamter. Tips are 1βό" (3.2cm) long. US specification & reliable quality gunsmith punches by Brownells. Part Nr: 080-475-006.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Roll Pin Starter Punches #5 Punch US Specifications
USD 6.99
(Indicative price - actual current price possibly lower)
Technical data & information: Start the removal of roll or spring pins without causing damage to the pins or the punch. Short shaft starter punch gives you more control by putting your hand closer to the pin and keeps you from bending longer finishing roll pin punches. Made from solid steel, with parallel-ground shanks and knurled handles. Mfg: brownells specs: steel, black. Kit contains one each of seven sizes: #1, 1/16" (1.6mm); #2, 5/64" (2mm); #3, 3/32" (2.4mm), #4, 1/8" (3.2mm); #5, 5/32" (4mm); #6, 3/16" (4.8mm); 7/32" (5.5mm); #7, 7/32" (5.5mm). US specification & reliable quality gunsmith punches by Brownells. Part Nr: 25034939.
More Details : click here
SEARCH this site : click here
|
|
|
Geissele Automatics Gas Block Punch Kit US Specifications
USD 24.99
(Indicative price - actual current price possibly lower)
Technical data & information: The geissele gas block pin punch set are made speccifically for the removal and installation of the 0.078" roll pin that secures the gas tube to the gas block on an ar-15/ar-308. Removal of a rusted in gas block roll pin has always been a challenge. The geissele punch set make gas block work a whole lot easier. Mfg: geissele automatics llc. US specification & reliable quality gunsmith punches by Geissele. Part Nr: 15172.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gunsmith Punches US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
