Nightforce 34mm X Treme Duty Ultralite 1 Piece Compact Magmount 34mm 0 Moa Ultralite Magmount US Specifications
Gun Scope Rings by Nightforce
|
Technical data & information: The nightforce x-treme duty ultralite 1-piece magmount adds a third crossbolt for even greater protection against recoil. The nightforce x-treme duty ultralite 1-piece magmount adds to the tough and reliable nightforce xtreme-duty ultralite unimount and magmount mounting systems, with titanium/aluminum construction providing the performance of steel at half the weight. The compact magmount requires less rail space than the traditional magmount, and is available to fit 34mm riflescope tubes. Machined from heavy-duty aluminum matte-black finish height: 0.84 inches fits standard picatinny rails options available for the nightforce x-treme duty mfg: nightforce. US specification & reliable quality gun scope rings by Nightforce. Part Nr: A361.
 Indicative Price: USD 286
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Talley Tactical Scope Rings 34mm Medium Matte Black Tactical Rings US Specifications
USD 179.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Heavy-duty scope rings are precision-machined from solid billet aluminum with dual recoil lugs to ensure your tactical scope won't budge under the heaviest recoil. Full-width ring caps are cut from the same billet as the bottom half of the ring for precise fit and held in place with four stainless steel allen head screws that won't work loose when properly tightened. Matching serial numbers ensure you always mate the cap with the bottom it came with. Locking bar, heavy-duty crossbolt and oversized, β½" hex nut locks the ring to any mil-std 1913 picatinny rail. Hard-anodized for extra surface strength, with a non-reflective matte black finish. Engraved front and back mfg: talley specs: 7075 t6 aluminum, hardcoat anodized, matte black, with 303 stainless steel screws, black finish. 1.9" (5cm) wide, .665" (16.8mm) thick. Models available for 1" (2.5cm) or 30mm o.D. Scope tubes. Heights measured from top of base to center of ring: low, 1" (2.5cm); high. US specification & reliable quality gun scope rings by Talley. Part Nr: BAT34M.
More Details : click here
SEARCH this site : click here
|
|
|
Burris Xtr eme Tactical Rings 30mm Medium Matte Tactical Rings US Specifications
USD 64.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Designed specifically to stand up to the rigor and immense recoil that accompanies tactical shooting, these heavy-duty xtreme tactical rings keep your optics secure for the most demanding missions. These super-strong rings are made of lightweight aluminum. Six screws anchor these rings and your riflescope in place on any picatinny or weaver-style rail for an unfailing return-to-zero. Choose from four ring heights to suit your optical objective, whether it's a red dot sight or riflescope scope. These rings are perfect for riflescopes on ar-15/ m16 flattop receivers and give you ample room for a proper cheek weld. These sturdy rings will also look good on varmint rifles, and they&rsqu mfg: burris specs: heights as measured from top of rail to bottom of ring: low βό", medium β½", high βύ", x-high 1"; x-high 1" version is ideal for ar15/m16 flattop receivers where scope height is critical. Includes 2 rings. US specification & reliable quality gun scope rings by Burris. Part Nr: 420162.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Dual Dovetail Rings 1 In Super Low Matte US Specifications
USD 25.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Leupold's famous rotary dovetail rings in both front and rear bases; there's no way a ring can shoot off its base. Ideal for large caliber, heavy kicking rifles that can throw a scope off easily, plus light caliber varmint rifles that need an absolutely rigid scope mount to make full use of the gun's accuracy potential. Dual dovetail rings must be used together; will not interchange with other leupold rings. Heights from low for small scopes to super high for giant objective bells. Sold in pairs. Mfg: leupold specs: steel. Finish: pb, polished, blue; matte, matte, blue; silver, matte. Height is from top of base to center of rings. US specification & reliable quality gun scope rings by Leupold. Part Nr: 60629.
More Details : click here
SEARCH this site : click here
|
|
|
Burris Solid Steel Zee Rings 1 Medium Gloss US Specifications
USD 27.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Burris solid steel rings not only ensure accuracy, they provide an extra measure of confidence and peace of mind. Machined from a solid block of steel to exacting tolerance, each top and bottom are matched for strength and fit. Designed to handle any rifle and any recoil from rimfires to magnum calibers. Burris offers a wide selection in 1" and 30mm. Mfg: burris measurements are from the bottom of the scope tube to the bottom of the ring: 1" low .130", med. .255", high .450". 30mm med .205", high .330". US specification & reliable quality gun scope rings by Burris. Part Nr: 420081.
More Details : click here
SEARCH this site : click here
|
|
|
Weaver Top Mount Rings 1" High Satin Blue US Specifications
USD 25.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Heights: low and medium for scopes w/objective diameters to approximately 1.75"(44.45mm). High for objectives above 1.75". Extra high for scopes with objectives up to 60mm. Mfg: weaver specs: aluminum lower; steel cap, screws, crossbolt and nut. Satin blue, matte blue or brushed stainless finish. Height (above base): 1" diameter, low, .090" (2.28mm); med., .164" (4.16mm); high, .332" (8.43mm); x-high, .560" (14.2mm). 30mm diameter, low, .290" (7.3mm); high, .485" (12mm. US specification & reliable quality gun scope rings by Weaver. Part Nr: 49050.
More Details : click here
SEARCH this site : click here
|
|
|
Ruger 1" Scope Ring 4k Medium Ss US Specifications
USD 36.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: High-quality ruger factory rings install easily and provide solid, zero-movement scope attachment to ruger rifles and handguns with integral bases, no. 1 rifles with factory base, and no. 3 rifles with special factory bases available separately. Low, medium, high, and extra-high heights in blued carbon steel, natural stainless steel, or stainless with ruger's proprietary matte target grey finish. Sold as single rings. Mfg: ruger specs: carbon steel, polished blue finish (bl), stainless steel, natural (ss), or target grey (tg) finish. Ring heights measured from top of base to bottom of scope tube. Low, .325". Medium (med.), .435". High, .565". Extra-high (x-high), .680". Offset ring availa. US specification & reliable quality gun scope rings by Ruger. Part Nr: 90282.
More Details : click here
SEARCH this site : click here
|
|
|
Burris Xtr eme Tactical Rings 30mm X High Matte Tactical Rings US Specifications
USD 64.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Designed specifically to stand up to the rigor and immense recoil that accompanies tactical shooting, these heavy-duty xtreme tactical rings keep your optics secure for the most demanding missions. These super-strong rings are made of lightweight aluminum. Six screws anchor these rings and your riflescope in place on any picatinny or weaver-style rail for an unfailing return-to-zero. Choose from four ring heights to suit your optical objective, whether it's a red dot sight or riflescope scope. These rings are perfect for riflescopes on ar-15/ m16 flattop receivers and give you ample room for a proper cheek weld. These sturdy rings will also look good on varmint rifles, and they&rsqu mfg: burris specs: heights as measured from top of rail to bottom of ring: low βό", medium β½", high βύ", x-high 1"; x-high 1" version is ideal for ar15/m16 flattop receivers where scope height is critical. Includes 2 rings. US specification & reliable quality gun scope rings by Burris. Part Nr: 420166.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Maxima Tactical Rings 1 Inch Medium Matte US Specifications
USD 103.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Picatinny tactical rings and bases, precision-machined from steel for maximum strength and reliability. Rugged, 1" and 30mm tactical rings feature a robust, stainless steel crosslug that will not swage, peen or deform under heavy recoil. Ensures consistent return-to-zero for optics that are removed and re-attached. Three, torx-style fasteners secure the vertically split ring halves at the top to prevent scope shift. Large, clamping nut at bottom provides exceptional holding power. One-piece, tactical bases are made from solid bar stock of cold drawn alloy steel, stress relieved for extra strength and uniformity. Available for standard elevation adjustment or with 20 moa forward angle fo mfg: warne mfg. Company specs: rings: steel, matte black, powder coat finish. Medium, .375" (9.5mm) high. High, .525" (13.3mm) high. Extra-high, .650" (16.5mm) high. Ultra-high, .935" (23.7mm) high. Bases: 12l14 carbon steel, powder coated, matte black. Available in standard or 20 moa. Savage bases. US specification & reliable quality gun scope rings by Warne. Part Nr: 601M.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Maxima Fixed Rings 1" Low Fixed Rings Gloss Black US Specifications
USD 41.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Maxima fixed rings are designed to be the strongest, most durable fixed mount system available. Typical steel scope mounts in this class use only 2 screws per ring, have a narrower clamping band and in most cases only absorb recoil in the front ring. Maxima fixed rings utilize 4 t-15 torx style socket cap screws for secure optics mounting. The maxima fixed series fit weaver style cross slot bases and incorporate a warne square stainless steel recoil control key in both the front and rear rings. This ensures a "no slip" positive recoil surface across the entire slot of the base and is capable of withstanding the heaviest of recoil. The maxima square recoil key also protects aga mfg: warne mfg. Company specs: steel, powder coated black (reg.), matte blue (matte), or silver alloy in matte silver (silver) finish. Height measured from top of base to inside bottom of ring. Available in low, .250" (6.35mm); medium, .375" (9.5mm); high, .525" (13.3mm). US specification & reliable quality gun scope rings by Warne. Part Nr: 200G.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Nightforce 34mm X Treme Duty Ultralite 1 Piece Compact Magmount 34mm 0 Moa Ultralite Magmount US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
