Noveske Rifleworks Ar 15/M16 Quick Detach Optic Mount US Specifications
Gun Optics Mount Sets by Noveske
|
Technical data & information: Extended cantilever mount provides plenty of eye relief to mount a 30mm scope, or position a magnifier, night vision device, or other sighting accessory behind the main optic. Two quick-release levers clamp to a flattop receiver rail with unique cam action for a tight hold during recoil. Depress the locking tabs, swing both levers open, and the mount easily lifts off the rifle. Cross bars can be adjusted to fit almost any picatinny or weaver-style rail, including over- or under-sized commercial rails. Levers may be positioned to open to the front or the rear to suit the operator's preference. Five, heavy duty steel hex head screws (three on top, two on bottom) clamp the 30mm vertically mfg: noveske rifleworks llc specs: 6061 t6 aluminum, type iii mil-spec hardcoat anodized finish, flat dark earth. Steel cross bars, matte black. 6" (15.2cm) o.A.L. Requires 4" (10.2cm) of rail space. Height measured from top of rail to bottom of scope body: .87" (2.2cm) high. Distance between rings: 2β½&qu. US specification & reliable quality gun optics mount sets by Noveske. Part Nr: 6000015.
 Indicative Price: USD 199.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Rs Regulate Ak47/Akm Optic Mount System Romanian M10 Full Length Rail US Specifications
USD 121
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Updated design allows for customization of the mounting platform. Option of three different lower mounts, with a full length lower rail, forward rail and rear rail. Placement of lower rail allows for optics to be positioned in the ideal location front to back, as well as right to left. Lightweight cnc machined aircraft grade 6061 t6 aluminum. Position optics in co-witness location. Allows field stripping of the rifle without removal of the optic on most ak variants. Redesigned thumb lever lock retains zero even after repeated optic removal and reinstallation. Ability to stake position for extreme duty. Akml allows the mounting of the aimpoint t-1 and h-1 micro red dot optics mfg: rs regulate specs: 6061 t6 aluminum, matte black teflon coated finish. Accepts optics with 30mm od tube. Fits ak and akm rifles equipped with receiver side mount base dovetail. Base not included. US specification & reliable quality gun optics mount sets by RS. Part Nr: AK310.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Trg Tikka T3x Direct Isms Mount 30mm 126mm Mounting Length 24 Moa US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a single billet of aluminum. Features direct mounting to trg integral scope rails. Will fit the tikka t3x without modifications. Older style t3's may require slight modifications to the ejection port (opening it approx. 1/10" downwards). M mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: ST3701.
More Details : click here
SEARCH this site : click here
|
|
|
J P Enterprises Flattop Extended Scope Mounts Jp Flattop Extended Scope Mounts 34mm US Specifications
USD 213.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The design goal of our extended eye relief scope mount was to take advantage of the generous eye relief found in the new generation of 1-4x, 1-6x and 1-8x rifle scopes ideally suited to practical rifle applications, whether field or competition. Used at 1x, the scope itself will effectively disappear from view to allow function similar to a true 1x dot sight. This technique, though, requires the scope to be mounted farther forward than usual, which is difficult to do with standard mounts without bridging the receiver and hand guard rail. This, of course, can be cumbersome and lead to possible poi shift due to flex in the hand guard. This modified version of our classic scope mount solve mfg: j p enterprises. US specification & reliable quality gun optics mount sets by JP. Part Nr: JPFTSM34E.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 34mm Isms Mount 121mm Mounting Length 30 Moa US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP4902.
More Details : click here
SEARCH this site : click here
|
|
|
Nikon Ar 15/M16 M 223 Scope Mount Ar Style Mount Realtree Max 1 US Specifications
USD 119.95
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The nikon p-series scope mount offers ar-15 owners a wide range of flexibility in their optics mounting, enabling them to select two different mounting points for front and rear rings, unlike one-piece optics mounts. The nikon p-series scope mount uses a two-piece reversible design, which allows for use with a wide range of optics. The mounts can also be positioned at different points on the rail for added flexibility. Features flat-dark earth finish or black finish height: 1.4 inches fits 1-inch diameter tubes designed for use with picatinny rails the nikon p-series scope mount also allows the charging handle on ar rifles to remain accessible. Mfg: nikon specs: aluminum, hardcoat anodized, matte black (mb), realtree max-1 (max) or mossy oak brush (brush) camouflage. Steel mounting hardware, black oxide finish. 5" (12.7cm) o.A.L. 3ß½" (8.9cm) center-to-center ring spacing; 3.125" (8cm) between ring edges. Requir. US specification & reliable quality gun optics mount sets by Nikon. Part Nr: 837.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Browning A Bolt 1" Medium Scope Mount US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 940000.
More Details : click here
SEARCH this site : click here
|
|
|
Nightforce Unimounts 30mm 1.375" 20 Moa Unimount US Specifications
USD 252
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The nightforce unimounts are designed to remain on the scope at all times, allowing quick removal of the scope or interfacing with different firearms. It is the most accurate mil. Std. 1913 mount available, incorporating a built-in 20 moa taper to maximize long-range capability. The unimount is the ultimate mount for attaching to weapons with an integral mil. Std. 1913 flat top-type receiver. Precise tolerances ensure that the riflescope is not subjected to stress, strain or bending as the ring screws are tightened. Cnc machined from 7075-t6, the unimount is finished with a matte black coating. Mfg: nightforce. US specification & reliable quality gun optics mount sets by Nightforce. Part Nr: A191.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Quick Detach Isms Qdp Mount 30mm 1.35" 0 Moa Qdp Mount US Specifications
USD 495
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The spuhr qdp mount is an extremely sturdy one-piece scope mount that clamps directly to any mil-std 1913 picatinny receiver rail or base. It combines the rock-solid stability of spuhr's proven ideal scope mounting system (isms) with easy-to-operate quick-release levers that let you attach and remove the spuhr qdp mount from your rifle with the mount and the scope as a single unit. The spuhr qdp mount has 45-degree split rings designed so the bulkiest part of the rings is not in your line of sight of the scope turrets. Another innovation is a bubble level built into the base to help you make sure the rifle is perfectly level, helping you control another important variable in lo mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: QDP3006.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 34mm 1.35" 20.6 Moa Unimount US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP4636.
More Details : click here
SEARCH this site : click here
|
|
|
Bkl Technologies 200 Seroes 1" Scope Rings 1" Offset Dovetail Rings Silver US Specifications
USD 35.95
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Aircraft-grade aluminum scope rings feature self-adjusting clamping legs that fit 3⁄8" or european 11mm dovetail mounts found on many bolt-action rimfire rifles. Each leg moves equally as the clamping screws are tightened to keep the scope centered on the rail. Clamping screws also fit into pre-drilled holes to equally spread the legs to easily slip over oversized rails. 200 series fits 1" scopes and 300 series fits 30mm scopes. Available as a one-piece cantilever mount with a 2.4" offset, a pair of scope rings, or as a pair of one standard and one offset ring with a 1.3" offset. Ring pairs available as either single, or double top strap. Single-strap rings measure mfg: bkl technologies. US specification & reliable quality gun optics mount sets by BKL. Part Nr: BKL274S.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Noveske Rifleworks Ar 15/M16 Quick Detach Optic Mount US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
