Tps Products Tsr W Picatinny/Weaver Scope Rings Tsr W Aluminum Rings 35mm Low US Specifications
Gun Scope Rings by TPS
|
Technical data & information: Tsr "w" series rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to weaver-style or mil-std 1913 (picatinny) bases. Mfg: tps products, llc. Specs: alloy steel, black oxide finish to mil-c-13924 standards. 5/8" (15.8mm) wide. Height measured from top of base to center of ring. 30mm, low: .925" (23.5mm). US specification & reliable quality gun scope rings by TPS. Part Nr: 30895.
 Indicative Price: USD 134.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Leupold Dual Dovetail Rings 30mm High Matte US Specifications
USD 37.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Leupold's famous rotary dovetail rings in both front and rear bases; there's no way a ring can shoot off its base. Ideal for large caliber, heavy kicking rifles that can throw a scope off easily, plus light caliber varmint rifles that need an absolutely rigid scope mount to make full use of the gun's accuracy potential. Dual dovetail rings must be used together; will not interchange with other leupold rings. Heights from low for small scopes to super high for giant objective bells. Sold in pairs. Mfg: leupold specs: steel. Finish: pb, polished, blue; matte, matte, blue; silver, matte. Height is from top of base to center of rings. US specification & reliable quality gun scope rings by Leupold. Part Nr: 49958.
More Details : click here
SEARCH this site : click here
|
|
|
Morr Accuracy Edge Light Weight Rings 30mm Straight Tall 3/8" Dovetail Rings (4 Screw) US Specifications
USD 68
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: The edge rings from morr accuracy feature strength with light weight. Finite element analysis ensures regidity where you need it and no extra weight where you don't. Available in 1" and 30mm tubes, straight or offset, and mount to either 11mm or 3/8" rails. The edge 4 screw rings are designed for centerfire benchrest shooters and utilize 4 screw ring caps. Average weight is 1.5oz. Per pair for the edge and 2.7 oz. Per pair for the 4 screw models. Mfg: morr accuracy specs: edge rings: 1.45" tall, from top of rail to center of ring. Edge tall: 1.55" from top of rail to center of ring edge low: 1.15" from top of rail to center of ring. Edge offset are .5" from center of action. US specification & reliable quality gun scope rings by Morr. Part Nr: E30ST384.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Quick Detach Scope Rings 1" Medium Matte Blue Rings US Specifications
USD 118.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Include precision machined, qd levers for fast, easy scope installation and removal, plus button-head screws for optional fixed ring application if desired. Mfg: talley specs: steel, blue, satin finish or stainless steel (ss), natural finish. Models available for 1" or 30mm diameter scope tubes. Ring heights measured from top of base to bottom of ring. Low, .300" (7.62mm). Medium, .400" (10.16mm). High, .500" (12.7mm). X high, .600" (15.2mm). Fit talley bases. US specification & reliable quality gun scope rings by Talley. Part Nr: 500004.
More Details : click here
SEARCH this site : click here
|
|
|
Vortex Precision Matched Riflescope Rings 34mm 0.92" High Rings US Specifications
USD 149.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Vortex optics starts with certified usa 7075 t6 billet aluminum and hold it to an extremely tight tolerance of .0005 using their precision computer numeric controlled (cnc) mill. These precision matched rings are kept in pairs throughout the manufacturing process, ensuring perfection from one set to another. These vortex rings are then serialized, vibratory tumbled, hand-bead blasted and finished off with a type iii hard coat anodize. Rugged, lightweight, anti-snag design robust, grade 8 fasteners 100% made in usa guaranteed for life mfg: vortex optics specs: ring heights are measured from the base of the ring to the center of the riflescope tube. Picatinny style. US specification & reliable quality gun scope rings by Vortex. Part Nr: PMR3492.
More Details : click here
SEARCH this site : click here
|
|
|
Badger Ordnance 34mm Tactical Rings 34mm Medium High Steel Rings US Specifications
USD 189.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Precision-machined, tactical ring sets provide strong, rigid mounting to securely hold large diameter, 34mm scope tubes, like schmidt & bender, on hard-recoiling guns. Robust, hex clamping nuts and weaver-style clamps lock rings tightly on weaver and picatinny mounts. Ring cap is secured with torx screws. Each set is serial-numbered to guarantee a precision-matched pair. Available in 1", 1.125 and 1.275" ring heights, steel or aluminum depending on model. Mfg: badger ordnance specs: 1" & 1.125" steel, matte black oxide finish. 1.275", max-alloy aluminum, black, matte, anodized finish. Ring heights measured from top of base to inside center of rings. Available in 1" (25.4mm), 1.25" (2.9cm) and 1.275" (31.9cm) ring heights. US specification & reliable quality gun scope rings by Badger. Part Nr: 30661.
More Details : click here
SEARCH this site : click here
|
|
|
Bkl Tech 300 Series 30mm Scope Rings 30mm Dovetail Rings Black US Specifications
USD 27.95
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Aircraft-grade aluminum scope rings feature self-adjusting clamping legs that fit 3⁄8" or european 11mm dovetail mounts found on many bolt-action rimfire rifles. Each leg moves equally as the clamping screws are tightened to keep the scope centered on the rail. Clamping screws also fit into pre-drilled holes to equally spread the legs to easily slip over oversized rails. 200 series fits 1" scopes and 300 series fits 30mm scopes. Available as a one-piece cantilever mount with a 2.4" offset, a pair of scope rings, or as a pair of one standard and one offset ring with a 1.3" offset. Ring pairs available as either single, or double top strap. Single-strap rings measure mfg: bkl technologies. US specification & reliable quality gun scope rings by BKL. Part Nr: BKL300MB.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Picatinny Scope Rings 1" High (1.125") Aluminum Rings US Specifications
USD 69.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: These rings are precision machined to true mil-std 1913 specs to fit picatinny-type bases such as brownells modular flattop riser mount and picatinny scope bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong u.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage-you can even use a u.S. Quarter in a pinch. Crossbolt has a square shank that serves as a recoil lug to solidly engage scope base when properly installed mfg: brownells specs: rings sold in pairs. Models available to fit 1" and 30mm scope bodies. Steel, 4140 billet steel, black, matte, oxide finish. Aluminum, 6061 t6 aluminum billet, hardcoat anodized black, matte. Heights measured from top of base to center of ring: low, .825" (2.1cm); med., 1&quo. US specification & reliable quality gun scope rings by Brownells. Part Nr: 1001803.
More Details : click here
SEARCH this site : click here
|
|
|
S&K Kontoured Verticle Split Rings Smooth Kontoured Verticle Rings 30mm Low Matte US Specifications
USD 73.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: All s&k rings are fully machined out of solid steel bar stock, tumble finished to remove all burrs, and have a 3/8" diameter stud that locks into a 3/8" hole or slot in the base which provides windage adjustment. The rings are locked into position by tightening cooperative cone pointed set screws. The rings are precision bored diameter and, being machined rather than extruded or stamped, form a precision fit that will not slip under recoil. They are nicely contoured and trim in appearance. Rings are tumble finished and blued to achieve a military-type dull or nonglare black finish that matches the black anodized insta-mount bases. Bases need purchased separately. Mfg: s&k. US specification & reliable quality gun scope rings by S&K. Part Nr: V30BLOW.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Maxima Quick Detach Rings Maxima Qd Rings 30mm Medium Silver US Specifications
USD 85.19
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Maxima quick detach rings are the most durable and versatile quick detachable mounting system available. Each ring is precision cnc machined from sintered steel technology, a process that allows intricate steel parts to be formed and then fired retaining the strength properties of steel while adding the necessary ductility that scope mounts require for perfect grip contact around the circumference of the scope. The maxima qd rings sport the unique warne indexable lever system which allows the user to remove the optics from the rifle then reattach it without the loss of zero, as well as allowing the location of the lever to be indexed once the rings are affixed to the bases. After mfg: warne mfg. Company specs: steel, powder-coated black or nickel plated. All available in polished (reg.), matte finish or silver, matte finish. Height measured from top of base to inside bottom of ring. Available in low, .250" (6.35mm), medium, .375" (9.5mm), high, .525" (13.3mm). US specification & reliable quality gun scope rings by Warne. Part Nr: 214LS.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Tps Products Tsr W Picatinny/Weaver Scope Rings Tsr W Aluminum Rings 35mm Low US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
