Vortex Optics Sport Cantilever Mounts 30mm 3" Offset Cantilever Ring Mount US Specifications
Gun Optics Mount Sets by Vortex
|
Technical data & information: Use these cantilever mounts for mounting magnified optics onto flattop ar style rifles. The 2" and 3" offset of these cantilever mounts position the scope further forward, allowing the correct eye relief and head placement on ar style rifles. Aluminum construction. The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces. Mfg: vortex optics. US specification & reliable quality gun optics mount sets by Vortex. Part Nr: CM203.
 Indicative Price: USD 99.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Warne Mfg. Company Ar 15/M16 R.A.M.P. Tactical Mount Tactical R.A.M.P Mount 1 Inch Green US Specifications
USD 161.49
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The rapid acquisition multisight platform (r.A.M.P.) is a one-piece cantilever mount with integral scope rings that positions optics farther forward to provide 1" of extra space at the rear for mounting a long eye relief scope, night vision device, or magnifier. Features removable mil-std 1913 picatinny rails on the left and right sides that let you mount secondary sights 45 off-axis from the main optic. Each top ring strap is secured with four torx screws for recoil-proof holding power. Two large hex nuts and 3" long steel clamping bar lock the mount to a picatinny receiver rail. Smooth contours and radiused edges give a streamlined appearance, reduce weight, and prevent snagging. Model mfg: warne mfg. Company specs: 6061 t6 aluminum, hardcoat anodized, and steel hardware, magnesium phosphate finish, matte black. 71/8" (18.1cm) long, 23⁄8" (6cm) wide, 2βό" (5.7cm) high. Height measured from top of rail to bottom of ring: .75" (1.9cm). Approximately 9.7 oz. (275g) wei. US specification & reliable quality gun optics mount sets by Warne. Part Nr: RAMP1Z.
More Details : click here
SEARCH this site : click here
|
|
|
Vortex Optics Precision Qr Extended Cantilever Mount 30mm US Specifications
USD 229.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: This quick-release cantilever mount is designed for mounting telescopic sights with 30mm tubes onto a flattop style ar-15 rifle. The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement when used on an ar-15. The precision optic mount is precision cnc machined from a block of 6061 t6 aluminum and finished in hard coat type 3 mil-spec anodized black for a rock hard lasting finish. Precision machined from 6061 t6 aluminum. Hard coat type 3 mil-spec anodized for a lifetime of performance. Mfg: vortex optics. US specification & reliable quality gun optics mount sets by Vortex. Part Nr: CM403.
More Details : click here
SEARCH this site : click here
|
|
|
Zro Delta Dloc M4 Scope Mount 34mm Dloc M4 Scope Mount US Specifications
USD 251.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Zrodelta's dloc-m4 cantilever scope mount grabs ahold of your modern sporting rifle's picatinny top rail and hangs on to it like two teenagers in love. This is the kind of quick-on-and-off mount busy ar-15 shooters love. With six crossbolts for recoil lugs and two spring-loaded clamping side bars, the dloc-m4 is simple to attach. Loosen the dloc-m4's nuts so the clamping bars can be pushed out, and since they're under spring tension, they'll automatically clamp down on your top rail with a vise-like grip that won't let go. Finger-tighten the nuts, and you're good to go, easy as pie and no tools required. Scope will maintain zero if taken off mfg: zro delta. US specification & reliable quality gun optics mount sets by ZRO Delta. Part Nr: 7.024E+11.
More Details : click here
SEARCH this site : click here
|
|
|
Zro Delta Dloc Mro 45 Degree Mount US Specifications
USD 134.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Slim enough to fit under most magnified optics, the zrodelta dloc-mro 45 degree mount offset adaptor lets you quickly switch from your primary optic to the mro sight- with just a twist of your rifle! three recoil lugs and six engagement points means the dloc system grabs on to your rail with an alligator like bite that won't rattle loose under heavy recoil or rough use in the field. Heavy duty springs in the side bar clamp down the instant you drop the mount on the rail, then add the final tightening with the convenient adjustment knob. Mount ensures optic retains true zero when you take it off and remount it on your rifle. Fits the trijicon mro mount fits r mfg: zro delta. US specification & reliable quality gun optics mount sets by ZRO Delta. Part Nr: 7.023E+11.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 34mm Isms Mount 121mm Mounting Length 0 Moa Type SP4004 US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP4004.
More Details : click here
SEARCH this site : click here
|
|
|
Nikon M Tactical 1 Piece Scope Mount 30mm Rings 30mm 0 Moa 1 Piece Scope Mount US Specifications
USD 74.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The lightweight m-tactical 30mm one-piece scope mount clamps to any ar-15 flattop receiver and is custom engineered to provide optimum height and eye relief for nikon's m-tactical series of scopes. In fact, it's so versatile, it can be used with a wide variety of other optics with 30mm o.D. Tubes that call for an easy-to-install picatinny mount. The m-tactical one-piece mount's cantilever extends approximately 2" forward of the receiver to accommodate long scopes and those with long eye relief. Two steel crossbolts and the full-length clamping bar secure the mount to any mil-std 1913 picatinny receiver rail. Lightweight strong aluminum construc mfg: nikon. US specification & reliable quality gun optics mount sets by Nikon. Part Nr: 839.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Browning A Bolt 1" Medium Scope Mount US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 940000.
More Details : click here
SEARCH this site : click here
|
|
|
Nikon P Tactical 1 Piece Scope Mount 1" Rings 1 0 Moa 1 Piece Scope Mount US Specifications
USD 69.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Nikon's p-tactical scope mount is essentially their m-tactical one-piece mount configured to accept the 1" tubes of their p-tactical line of ar-15 / msr scopes. Like its 30mm friendly cousin, the p-tactical mount is available in standard, dead-flat (0 moa) configuration or with built-in 20 moa elevation that helps you land accurate long-range shots without exceeding your scope's elevation adjustment. Of course, the p-tactical mount clamps to any ar-15 flattop receiver and provides optimum height and eye relief for your nikon p-tactical scope. It's geared for ar-15 installations, but can easily be used with a wide variety of other optics with 1" o.D. Tubes mfg: nikon. US specification & reliable quality gun optics mount sets by Nikon. Part Nr: 16560.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Kimber Model 84 Current Production Medium 1" Scope Mounts US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 948749.
More Details : click here
SEARCH this site : click here
|
|
|
Nightforce X Treme Duty Ultralite Unimounts 34mm 1.50 0 Moa Unimount US Specifications
USD 252
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Just because you have the best possible optic for your precision rifle doesn't mean you're ready for the field. Having a solid set of scope rings is also essential to the accuracy equation, and nightforce x-treme duty ultralite unimount scope rings are built to provide the essential link between your optic and rifle. Each nightforce x-treme duty ultralite unimount is machined from titanium alloy, providing an unprecedented combination of strength and lightness. The rings rise 1.50 inches from the top of the receiver, and sizes are available for both 30mm and 34mm scope tubes. One particular model of the nightforce x-treme duty ultralite unimount is designed specifically mfg: nightforce. US specification & reliable quality gun optics mount sets by Nightforce. Part Nr: A497.
More Details : click here
SEARCH this site : click here
|
|
|
Nikon Ar 15/M16 M 223 Scope Mount Ar Style Mount Realtree Max 1 US Specifications
USD 119.95
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The nikon p-series scope mount offers ar-15 owners a wide range of flexibility in their optics mounting, enabling them to select two different mounting points for front and rear rings, unlike one-piece optics mounts. The nikon p-series scope mount uses a two-piece reversible design, which allows for use with a wide range of optics. The mounts can also be positioned at different points on the rail for added flexibility. Features flat-dark earth finish or black finish height: 1.4 inches fits 1-inch diameter tubes designed for use with picatinny rails the nikon p-series scope mount also allows the charging handle on ar rifles to remain accessible. Mfg: nikon specs: aluminum, hardcoat anodized, matte black (mb), realtree max-1 (max) or mossy oak brush (brush) camouflage. Steel mounting hardware, black oxide finish. 5" (12.7cm) o.A.L. 3ß½" (8.9cm) center-to-center ring spacing; 3.125" (8cm) between ring edges. Requir. US specification & reliable quality gun optics mount sets by Nikon. Part Nr: 837.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Mark 4 Ims 30mm Mount 30mm Matte Black US Specifications
USD 156.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The leupold mark 4 ims 30mm mount is built from durable bar stock and provides a solid platform for mounting an optic on your ar. The ims (integral mounting system) locks securely onto the mil-spec 1913/picatinny rail of your rifle and can be removed and remounted without rezeroing. Specially-designed integral bases eliminate the need for risers no eye-relief issues; eliminates the need for short eye relief scopes simply mark one location on your rail for rapid remounting and an instant return to zero with the leupold mark 4 ims 30mm mount your ar rifle becomes even more versatile than before. In addition, these integral bases and rings are backed by leupold&rsqu mfg: leupold. US specification & reliable quality gun optics mount sets by Leupold. Part Nr: 171986.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 34mm Isms Mount 121mm Mounting Length 0 Moa Type SP4002 US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP4002.
More Details : click here
SEARCH this site : click here
|
|
|
Midwest Industries Ar Scope Mount 30mm US Specifications
USD 104.99
(Indicative price - actual current price possibly lower)
Gun Optics Mount Sets US Specifications
Technical data & information: Designed specifically for ar style rifles, this scope mount is constructed of 6061 hard coat anodized aluminum and features a forward offset for proper eye relief. Lightweight mount is built for extreme use and includes a long, one-piece clamping bar that will not loosen or shift from heavy use or recoil. If the mount is removed and remounted, the large lower recoil lug will return the mount to zero. Mount places scope 1.56" above the top of the rifle, allowing for use of scopes with up to 56mm objective. Mfg: midwest industries, inc. Specs: 6061 aluminum, hardcoat anodized, black. 5.5" (13.9cm) long, 2.5" (6.4cm) high, 1.9" (4.8cm) wide. 3.4" (8.5cm) between rings. .9" (2.3cm) from top of rail to bottom of scope tube. 2.2" (5.6cm) from top of rail to top of rings. US specification & reliable quality gun optics mount sets by Midwest. Part Nr: MISM30.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Vortex Optics Sport Cantilever Mounts 30mm 3" Offset Cantilever Ring Mount US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
