Warne Mfg. Company Magnum Special Application Maxima Rings Maxima Qd Rings 1 Inch Ultra High Matte US Specifications
Gun Scope Rings by Warne
|
Technical data & information: Vertically split rings, precision-machined from steel bar stock, hold large objective, heavy scopes firmly against recoil. Finished to exacting tolerances so the scope returns to zero, even after repeated dismountings. Permanent mount (perm) uses two socket screws to solidly lock rings to base, especially suitable for rough duty applications. Quick detach (qd), double lever rings clamp quickly and securely; dismount in an instant when you lift the lever. Once locked, the levers can be repositioned so both rest at the same angle. Ultra high rings put scope at correct height for flattop ar-15's and h&k sl7 rifle. Mfg: warne mfg. Company specs: steel, blue, matte finish. Height measured from top of base to bottom of ring saddle. Qd: 1" (2.5cm): x-high, .650" (16.5mm) and ultra-high, .935" (23.7mm); 30mm (1.18"): x high -.650 (16.5mm) and ultra-high, .850" (21.6mm). Perm: 1" x-high, .650&q. US specification & reliable quality gun scope rings by Warne. Part Nr: 204LM.
 Indicative Price: USD 88.39
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification gun & shooting items : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Tps Products Tsr W Picatinny/Weaver Scope Rings Tsr W Aluminum Rings 35mm Low US Specifications
USD 134.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Tsr "w" series rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to weaver-style or mil-std 1913 (picatinny) bases. Mfg: tps products, llc. Specs: alloy steel, black oxide finish to mil-c-13924 standards. 5/8" (15.8mm) wide. Height measured from top of base to center of ring. 30mm, low: .925" (23.5mm). US specification & reliable quality gun scope rings by TPS. Part Nr: 30895.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Maxima Fixed Rings 1" Low Fixed Rings Matte Black US Specifications
USD 35.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Maxima fixed rings are designed to be the strongest, most durable fixed mount system available. Typical steel scope mounts in this class use only 2 screws per ring, have a narrower clamping band and in most cases only absorb recoil in the front ring. Maxima fixed rings utilize 4 t-15 torx style socket cap screws for secure optics mounting. The maxima fixed series fit weaver style cross slot bases and incorporate a warne square stainless steel recoil control key in both the front and rear rings. This ensures a "no slip" positive recoil surface across the entire slot of the base and is capable of withstanding the heaviest of recoil. The maxima square recoil key also protects aga mfg: warne mfg. Company specs: steel, powder coated black (reg.), matte blue (matte), or silver alloy in matte silver (silver) finish. Height measured from top of base to inside bottom of ring. Available in low, .250" (6.35mm); medium, .375" (9.5mm); high, .525" (13.3mm). US specification & reliable quality gun scope rings by Warne. Part Nr: 200M.
More Details : click here
SEARCH this site : click here
|
|
|
Weaver Sure Grip Rings 1" High Gloss Rings US Specifications
USD 29.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Steel caps with two screws per side provide extra strong, 4-screw, clamping power. Helps ensure that reticle stays square while tightening top screws. Large clamp nut locks rings to base, provides easy scope installation, removal; and accurate return to zero after re-installation. Mfg: weaver specs: aluminum lower; steel cap, screws, crossbolt and nut. Black, gloss or matte finish. Heights (above base): 1 (2.5cm) diameter, med., .164" (4.16mm); high, .332" (8.43mm); x-high, .560" (14.2mm). US specification & reliable quality gun scope rings by Weaver. Part Nr: 49161.
More Details : click here
SEARCH this site : click here
|
|
|
Weaver Top Mount Rings 1" X High Matte Blue US Specifications
USD 25.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Heights: low and medium for scopes w/objective diameters to approximately 1.75"(44.45mm). High for objectives above 1.75". Extra high for scopes with objectives up to 60mm. Mfg: weaver specs: aluminum lower; steel cap, screws, crossbolt and nut. Satin blue, matte blue or brushed stainless finish. Height (above base): 1" diameter, low, .090" (2.28mm); med., .164" (4.16mm); high, .332" (8.43mm); x-high, .560" (14.2mm). 30mm diameter, low, .290" (7.3mm); high, .485" (12mm. US specification & reliable quality gun scope rings by Weaver. Part Nr: 49044.
More Details : click here
SEARCH this site : click here
|
|
|
Burris Xtr eme Tactical Rings 1" Low Matte Tactical Rings US Specifications
USD 53.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Designed specifically to stand up to the rigor and immense recoil that accompanies tactical shooting, these heavy-duty xtreme tactical rings keep your optics secure for the most demanding missions. These super-strong rings are made of lightweight aluminum. Six screws anchor these rings and your riflescope in place on any picatinny or weaver-style rail for an unfailing return-to-zero. Choose from four ring heights to suit your optical objective, whether it's a red dot sight or riflescope scope. These rings are perfect for riflescopes on ar-15/ m16 flattop receivers and give you ample room for a proper cheek weld. These sturdy rings will also look good on varmint rifles, and they&rsqu mfg: burris specs: heights as measured from top of rail to bottom of ring: low βό", medium β½", high βύ", x-high 1"; x-high 1" version is ideal for ar15/m16 flattop receivers where scope height is critical. Includes 2 rings. US specification & reliable quality gun scope rings by Burris. Part Nr: 420180.
More Details : click here
SEARCH this site : click here
|
|
|
Badger Ordnance 34mm Tactical Rings 34mm Medium High Steel Rings US Specifications
USD 189.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Precision-machined, tactical ring sets provide strong, rigid mounting to securely hold large diameter, 34mm scope tubes, like schmidt & bender, on hard-recoiling guns. Robust, hex clamping nuts and weaver-style clamps lock rings tightly on weaver and picatinny mounts. Ring cap is secured with torx screws. Each set is serial-numbered to guarantee a precision-matched pair. Available in 1", 1.125 and 1.275" ring heights, steel or aluminum depending on model. Mfg: badger ordnance specs: 1" & 1.125" steel, matte black oxide finish. 1.275", max-alloy aluminum, black, matte, anodized finish. Ring heights measured from top of base to inside center of rings. Available in 1" (25.4mm), 1.25" (2.9cm) and 1.275" (31.9cm) ring heights. US specification & reliable quality gun scope rings by Badger. Part Nr: 30661.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company 7.3/22 Rings 30mm Medium Silver 7.3/22 Quick Detach Rings US Specifications
USD 65.44
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: The strongest small bore scope rings available. Designed to fit a very wide selection of rifles and fit both 3/8" and 11mm dovetails. This is made possible by using a solid steel asymmetrical reversible clamp that can be flipped 180β° and used on wider or narrower dovetails for best fit. Features a 70/30 horizontal construction and are only 1/2" wide. Attachment is made to the dovetail using a single t-15 torx style fastener and have 2 of the same fasteners for the ring top strap holding the entire package together securely. Mfg: warne mfg. Company specs: steel, powder coated, black, matte or gloss finish. Height measured from top of base to inside, bottom of ring. Medium .406" (10.3mm) nominal high. High, .525" (13.3mm) nominal high. US specification & reliable quality gun scope rings by Warne. Part Nr: 314LS.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Maxima Grooved Receiver Line Fixed Ruger Rings Ruger M77 Mark Ii Hawkeye Super Redhawk 1" Med Matte US Specifications
USD 50.39
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Maxima grooved receiver line of scope mounts are designed to fill the need of mounting scopes to rifles with an integrated receiver mounting rail. Because each manufacturer has their own proprietary mounting rail design, each ring model must be machined to exacting tolerances for proper fit and function. The maxima grooved receiver line fulfills that need. The precision cnc machined warne rings provide unsurpassed strength, durability and quality, and fit a variety of rifle models including ruger #1, ruger 77, mini 14 & 30, and ruger blackhawk and redhawk. Maxima fixed rings are designed to be the strongest, most durable fixed mount system available. Typical steel scope mounts in th mfg: warne mfg. Company specs: mim steel. Powder coat, gloss black (reg) or matte black (mat) in 1" (25.4mm) or 30mm (1.2") dia. Heights measured from top of base to inside bottom of ring. Medium: .460" (11.7mm). High: .585" (14.9mm). US specification & reliable quality gun scope rings by Warne. Part Nr: 1R7M.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Mark 4 Rings 1" Medium Matte Aluminum Mark 4 Rings US Specifications
USD 149.99
(Indicative price - actual current price possibly lower)
Gun Scope Rings US Specifications
Technical data & information: Heavy-duty rings and bases are built to withstand extreme service without movement or loss of zero. Larger contact area between the scope/rings and base/receiver for less chance of movement. Large hex nuts on rings allow fast torquing of cross bolts for easy adjustment. Non reflective, matte finish. Mounting screws and torx head wrench included. Steel rings, cnc machined from solid 11l17 cold-rolled bar stock, then blued. Aluminum rings x"x cnc machined from 7075 t651 aluminum alloy and hardcoat anodized for maximum strength and wear resistance. Mfg: leupold specs: steel or aluminum, matte black finish rings, 1" (2.5cm) or 30mm (1.18in) inside diameter. Height from top of base to center of ring for both 1" and 30mm: med., .84" (2.1cm); high, 1.06" (2.7cm); super high, 1.4" (3.5cm). US specification & reliable quality gun scope rings by Leupold. Part Nr: 57524.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Warne Mfg. Company Magnum Special Application Maxima Rings Maxima Qd Rings 1 Inch Ultra High Matte US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
