Gunsmith Power Milling Cutters US Specifications
| Page 2
|
|
|
 Brownells Hss Semi Auto Pistol Sight Base Cutter 65Β°hss Semi Auto Sight Base Cutter US Specifications
USD 31.99
(Indicative price - actual current price possibly lower)
Technical data & information: Our special 65 shoulder sight base cutter designed to cut dovetails for both standard colt factory and mil-spec 1911 autos, and for replacement sights like wichita hi-mount, older bo- mar and others with a 65 shoulder. Some makers use a 60 dovetail on their rear sights and we also have a cutter to match them. For low-mount adjustable sights use the standard sight base cutter shown on this page. Actual cutting diameter is .330" so more than one pass will be required to install most sights. This is done on purpose to allow for factory variations in base width as well as milling tolerances. Caution: for use in milling machine only. High speed steel, 2" (5cm) long, 3̺ mfg: brownells. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 080-621-330.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Solid Carbide Ball End Mills 1/4" Carbide Ball End Mill US Specifications
USD 45.99
(Indicative price - actual current price possibly lower)
Technical data & information: Four-flute, center-cut design produces smooth cuts and allows plunge cutting to eliminate pre-drilling. Right-hand cut, right-hand helix. Use in right-hand turning equipment. Single-ended. Premium, high feed rate carbide for hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62cm). ß?" (6.35mm) dia. X .750" (19mm) long cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 14025000.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Carbide Standard Sight Base Cutter US Specifications
USD 79.99
(Indicative price - actual current price possibly lower)
Technical data & information: Universal sight base cutter made for sights with 60 shoulder and a 3⁄8" base. Cuts most standard front and rear rifle sights as well as 1911 auto low-mount, adjustable sights like e.E.A. Super sights, millett and current bo-mar. Cutter is slightly undersized at .359" which requires that you make two cutting passes to compensate for factory variations in sight manufacture and milling tolerances. Designed with proper relief for maximum strength and clean cutting. Caution: for use in milling machine only. Solid carbide. 2" (5cm) long. 3/8" (9.5mm) diameter shank. 60 shoulder. Mfg: brownells. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 080-621-060.
More Details : click here
SEARCH this site : click here
|
|
|
Evolution Armory .480x65 Dovetail Cutter .480x65 Dovetail Cutter US Specifications
USD 162.99
(Indicative price - actual current price possibly lower)
Technical data & information: The .480x65 dovetail cutter enhances the capabilities of any gunsmith looking to install low mount sights onto project handguns and ensures that they have the right high-quality tool for the job. The .480x65 dovetail cutter is designed specifically to cut a slightly undersized slot for rear sights that fit a standard .500" dovetail. The cutter is slightly undersized in order to provide gunsmiths with the ability to do final fitting and ensure that even slightly undersized sights will work. Cutting tool made from solid carbide six-flute design made with 1/2-inch shank the .480x65 dovetail cutter measures 2.53 inches in overall length and can be used to r mfg: evolution armory. US specification & reliable quality gunsmith power milling cutters by Evolution. Part Nr: DG5770.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells High Speed Steel End Mill Cutter 1/4" End Mill US Specifications
USD 36.99
(Indicative price - actual current price possibly lower)
Technical data & information: Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. For general purpose end milling operations in unhardened steels. ß?" through 7⁄16" sizes contain 8% cobalt for added toughness. Mfg: brownells specs: 5mm through 3⁄8" sizes have 3⁄8" dia. Shanks, β½" size has β½" dia. Shank. Overall lengths from 2-7⁄16" (6.2cm) to 3βό" (8.25cm). ß?" (6.35mm) dia. X 5⁄8" (15.8mm) long cut. 3/8" (9.5mm) dia. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 44118.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Hss Front Sight Dovetail Cutter 60Β°hss Front Sight Dovetail Cutter US Specifications
USD 32.99
(Indicative price - actual current price possibly lower)
Technical data & information: Cuts lengthwise dovetail required to install special handgun front sights from jim clark, ed brown, bob marvel and others. Slightly undersized to allow for precise final fitting and to compensate for any machine wear. Caution: for use in milling machine only. High speed steel. .300" (7.3mm) diameter cut, 3⁄8" (9.5mm) diameter shank. 60 or 65 shoulder. Do not exceed 700 rpm, higher speed will break teeth. Mfg: brownells. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 8.00003E+11.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Solid Carbide Center Cut End Mill Cutters 5/16" End Mill US Specifications
USD 51.99
(Indicative price - actual current price possibly lower)
Technical data & information: Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly in even tough, hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62mm). ß?" (6.35mm) dia. X .750" (19mm) long ‑cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. 7/16" (11.1mm) dia. X 1" (25.4mm) long c. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 11131250.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells High Speed Steel Wilson Dovetail Cutter .290" X 60Β° US Specifications
USD 32.99
(Indicative price - actual current price possibly lower)
Technical data & information: 2" (5cm) long. .375" (9.5mm) diameter shaft. 60ß° shoulder. Do not exceed 700 rpm, higher speed will break teeth. Sight is a .300" x 60 degree dovetail that may require machining of slide. Mfg: brownells specs: sight body steel with matte black (blued) finish, .300" x 60 degree dovetail. Installation may require machining of slide. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 080-621-290.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Front Sight Insert Cutter Hss Front Sight Insert Cutter US Specifications
USD 13.99
(Indicative price - actual current price possibly lower)
Technical data & information: We've had many requests for a small dovetail cutter that would speed up the cutting of dovetails in front sight blades when installing colored inserts. The one we've had made cuts a βό" wide dovetail, just right for sight inserts, and the finished product is very precise. Since the cutter is small, (it tapers to a diameter of .110"), you must make an initial cut with a 1/8" end mill. By using the end mill to remove some metal first, you'll avoid overloading the cutter and breaking it. Caution: for use in milling machine only. High speed steel. 21/32" (5.1cm) long. 1/4" (6.3cm) diameter shank. Maximum cut depth is .100" (2.5mm) 60 mfg: brownells. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 080-621-245.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Cryo Treated Dovetail Cutter 65Β° X .330" US Specifications
USD 41.99
(Indicative price - actual current price possibly lower)
Technical data & information: We've taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320β°f to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we've added two rings near the working end to differentiate them from our regular cutters. Do not exceed 700 rpm or cutters will break. Mfg: brownells specs: cryo-treated, high-speed steel. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 080-000-275.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells 1911 Auto Hss Lo Mount Sight Base Cutter US Specifications
USD 49.99
(Indicative price - actual current price possibly lower)
Technical data & information: These cutters are specially designed by us and made to our specifications for cutting the sight base slot required to mount the wichita and novak lo-mount 1911 auto sights. Use " carbide end mill to remove the bulk of the material (see drawing above) then make final dovetail cut. Final cut to lower rear of slide is done with an end mill and is not a part of the sight base cut. Made slightly undersized to compensate for variations in sight bases and milling tolerances on installation. With the popularity of custom 1911 auto pistols, this cutter is one that you will use frequently in your custom work. Caution: for use in milling machine only. 2" (5cm). .495" diameter cut mfg: brownells. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 080-621-495.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Hss Semi Auto Pistol Sight Base Cutter 60Β°hss Semi Auto Base Cutter US Specifications
USD 32.99
(Indicative price - actual current price possibly lower)
Technical data & information: Our special 65 shoulder sight base cutter designed to cut dovetails for both standard colt factory and mil-spec 1911 autos, and for replacement sights like wichita hi-mount, older bo- mar and others with a 65 shoulder. Some makers use a 60 dovetail on their rear sights and we also have a cutter to match them. For low-mount adjustable sights use the standard sight base cutter shown on this page. Actual cutting diameter is .330" so more than one pass will be required to install most sights. This is done on purpose to allow for factory variations in base width as well as milling tolerances. Caution: for use in milling machine only. High speed steel, 2" (5cm) long, 3̺ mfg: brownells. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 080-621-331.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Carbide Sight Insert Cutter US Specifications
USD 33.99
(Indicative price - actual current price possibly lower)
Technical data & information: We've had many requests for a small dovetail cutter that would speed up the cutting of dovetails in front sight blades when installing colored inserts. The one we've had made cuts a 1⁄4" wide dovetail, just right for sight inserts, and the finished product is very precise. Since the cutter is small, (it tapers to a diameter of .110"), you must make an initial cut with a 1⁄8" end mill (listed below). By using the end mill to remove some metal first, you'll avoid overloading the cutter and breaking it. Caution: for use in milling machine only. Solid carbide 2" (5cm) long. 1/4" (6.3cm) diameter shank. 60 shoulder. Mfg: brownells. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 080-621-246.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Solid Carbide Ball End Mills 3/8" Carbide Ball End Mill US Specifications
USD 62.99
(Indicative price - actual current price possibly lower)
Technical data & information: Four-flute, center-cut design produces smooth cuts and allows plunge cutting to eliminate pre-drilling. Right-hand cut, right-hand helix. Use in right-hand turning equipment. Single-ended. Premium, high feed rate carbide for hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62cm). ß?" (6.35mm) dia. X .750" (19mm) long cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 14037500.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Solid Carbide End Mills 3/16" (4.7mm) Dia. 2" (5cm) Overall US Specifications
USD 22.99
(Indicative price - actual current price possibly lower)
Technical data & information: The easiest way to get a good, clean cut in hardened steels. Perfect for altering 1911 slides for low mount style rear. (cut most of slot with mill, finish with dovetail cutter.) gives extended tool life when used in softer metals. 3/16" diameter is the right cutter to use when converting remington m-700 bolts to accept sako-style extractors. Mfg: brownells specs: hardened carbide steel cutters. Available in 3/16" (4.7mm) diameter shank with 5/8" cut length or " (6.35mm) diameter shank with " cut length. 4-flute. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 20501012.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Solid Carbide Center Cut End Mill Cutters 7/16" End Mill US Specifications
USD 60.99
(Indicative price - actual current price possibly lower)
Technical data & information: Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly in even tough, hardened steels. Mfg: brownells specs: shank dia. Is same as cut dia. Overall lengths from 2β½" (6.35cm) to 3" (7.62mm). ß?" (6.35mm) dia. X .750" (19mm) long ‑cut. 5/16" (7.9mm) dia. X .812" (20.6mm) long cut. 3/8" (9.5mm) dia. X .875" (22.2mm) long cut. 7/16" (11.1mm) dia. X 1" (25.4mm) long c. US specification & reliable quality gunsmith power milling cutters by Brownells. Part Nr: 11143750.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gunsmith Power Milling Cutters US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
