Gun Optics Mount Sets US Specifications
| Page 3
|
|
|
 Noveske Rifleworks Ar 15/M16 Quick Detach Optic Mount US Specifications
USD 199.99
(Indicative price - actual current price possibly lower)
Technical data & information: Extended cantilever mount provides plenty of eye relief to mount a 30mm scope, or position a magnifier, night vision device, or other sighting accessory behind the main optic. Two quick-release levers clamp to a flattop receiver rail with unique cam action for a tight hold during recoil. Depress the locking tabs, swing both levers open, and the mount easily lifts off the rifle. Cross bars can be adjusted to fit almost any picatinny or weaver-style rail, including over- or under-sized commercial rails. Levers may be positioned to open to the front or the rear to suit the operator's preference. Five, heavy duty steel hex head screws (three on top, two on bottom) clamp the 30mm vertically mfg: noveske rifleworks llc specs: 6061 t6 aluminum, type iii mil-spec hardcoat anodized finish, flat dark earth. Steel cross bars, matte black. 6" (15.2cm) o.A.L. Requires 4" (10.2cm) of rail space. Height measured from top of rail to bottom of scope body: .87" (2.2cm) high. Distance between rings: 2β½&qu. US specification & reliable quality gun optics mount sets by Noveske. Part Nr: 6000015.
More Details : click here
SEARCH this site : click here
|
|
|
Rs Regulate Ak47/Akm Optic Mount System Akog Acog/Bco Mount Upper Mount US Specifications
USD 73
(Indicative price - actual current price possibly lower)
Technical data & information: Updated design allows for customization of the mounting platform. Option of three different lower mounts, with a full length lower rail, forward rail and rear rail. Placement of lower rail allows for optics to be positioned in the ideal location front to back, as well as right to left. Lightweight cnc machined aircraft grade 6061 t6 aluminum. Position optics in co-witness location. Allows field stripping of the rifle without removal of the optic on most ak variants. Redesigned thumb lever lock retains zero even after repeated optic removal and reinstallation. Ability to stake position for extreme duty. Akml allows the mounting of the aimpoint t-1 and h-1 micro red dot optics mfg: rs regulate specs: 6061 t6 aluminum, matte black teflon coated finish. Accepts optics with 30mm od tube. Fits ak and akm rifles equipped with receiver side mount base dovetail. Base not included. US specification & reliable quality gun optics mount sets by RS. Part Nr: AKOG.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Remington 700/725 Sa High 30mm Scope Mounts 20 Moa US Specifications
USD 69.99
(Indicative price - actual current price possibly lower)
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 750700SM.
More Details : click here
SEARCH this site : click here
|
|
|
Zro Delta Dloc Deltapoint Pro 45 Degree Mount US Specifications
USD 134.99
(Indicative price - actual current price possibly lower)
Technical data & information: The zrodelta dloc-deltapoint pro 45 degree mount offset adaptor lets you quickly go from a primary, magnified optic to up close red dot action- without shifting your head! six engagement points, and three recoil lugs, allows the dloc system to get ahold of plenty of rail and hang on to it with a pit bull like bite! the instant you drop the dloc-deltapoint pro 45 on your rail, heavy duty springs in the side bar clamp down to keep it in place for easy one handed manipulation. Then a few turns on the tightening knob and the mount is locked solidly in place! and since the optic remains on the mount, you can take it off your rifle and it will "return to zero" when reatta mfg: zro delta. US specification & reliable quality gun optics mount sets by ZRO Delta. Part Nr: 7.023E+11.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Remington 700/725 La Medium 1" Scope Mounts 20 Moa US Specifications
USD 69.99
(Indicative price - actual current price possibly lower)
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 940700LM.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Ar 15/M16 R.A.M.P. Tactical Mount Tactical R.A.M.P Mount 34mm Blue US Specifications
USD 186.99
(Indicative price - actual current price possibly lower)
Technical data & information: The rapid acquisition multisight platform (r.A.M.P.) is a one-piece cantilever mount with integral scope rings that positions optics farther forward to provide 1" of extra space at the rear for mounting a long eye relief scope, night vision device, or magnifier. Features removable mil-std 1913 picatinny rails on the left and right sides that let you mount secondary sights 45 off-axis from the main optic. Each top ring strap is secured with four torx screws for recoil-proof holding power. Two large hex nuts and 3" long steel clamping bar lock the mount to a picatinny receiver rail. Smooth contours and radiused edges give a streamlined appearance, reduce weight, and prevent snagging. Model mfg: warne mfg. Company specs: 6061 t6 aluminum, hardcoat anodized, and steel hardware, magnesium phosphate finish, matte black. 71/8" (18.1cm) long, 23⁄8" (6cm) wide, 2βό" (5.7cm) high. Height measured from top of rail to bottom of ring: .75" (1.9cm). Approximately 9.7 oz. (275g) wei. US specification & reliable quality gun optics mount sets by Warne. Part Nr: RAMP34BU.
More Details : click here
SEARCH this site : click here
|
|
|
Badger Ordnance Low Profile Harris Bipod Mounts Low Profile Harris Mount Picatinny US Specifications
USD 68.99
(Indicative price - actual current price possibly lower)
Technical data & information: The badger ordnance low-profile harris bipod mount replaces your current mounting plate and thumbscrew to provide a more streamlined, lower-profile attachment point for harris engineering swivel-style bipods. It can be easily installed for use with any harris brm-s bipod in just a few minutes. Badger ordnance's engineers designed the low-profile harris bipod mount to be strong enough that it can even be used for barricade-braced shooting without the risk of the mount breaking. For use with harris brm-s bipods includes all necessary mounting hardware, installation tool is not included picatinny model attaches to any mil-std 1913 picatinny accessory rail mfg: badger ordnance. US specification & reliable quality gun optics mount sets by Badger. Part Nr: 53401.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Ar 15/M16 R.A.M.P. Tactical Mount Tactical R.A.M.P Mount 1 Inch Dark Earth US Specifications
USD 151.99
(Indicative price - actual current price possibly lower)
Technical data & information: The rapid acquisition multisight platform (r.A.M.P.) is a one-piece cantilever mount with integral scope rings that positions optics farther forward to provide 1" of extra space at the rear for mounting a long eye relief scope, night vision device, or magnifier. Features removable mil-std 1913 picatinny rails on the left and right sides that let you mount secondary sights 45 off-axis from the main optic. Each top ring strap is secured with four torx screws for recoil-proof holding power. Two large hex nuts and 3" long steel clamping bar lock the mount to a picatinny receiver rail. Smooth contours and radiused edges give a streamlined appearance, reduce weight, and prevent snagging. Model mfg: warne mfg. Company specs: 6061 t6 aluminum, hardcoat anodized, and steel hardware, magnesium phosphate finish, matte black. 71/8" (18.1cm) long, 23⁄8" (6cm) wide, 2βό" (5.7cm) high. Height measured from top of rail to bottom of ring: .75" (1.9cm). Approximately 9.7 oz. (275g) wei. US specification & reliable quality gun optics mount sets by Warne. Part Nr: RAMP1DE.
More Details : click here
SEARCH this site : click here
|
|
|
Aimpoint Twistmount For 3x Magnifier Twistmount Ring Only US Specifications
USD 98
(Indicative price - actual current price possibly lower)
Technical data & information: Quick-detach mount for aimpoint 3x magnifier lets you change instantly from long-range to cqb shooting modes. Simply depress the release lever, twist the magnifier, and lift it off for an unencumbered close-range sight picture. Low-profile base clamps picatinny-style rail; extra-long scope ring provides ample surface contact area for a no-slip grasp on the magnifier body. May also be used as a quick-detach mount for other 30mm optics. Extra twistmount bases sold separately, so you can quickly move your magnifier from one rifle to another. Co-witness spacer (available separately) raises sight axis for proper co-witnessing with factory-height backup iron sights. Blends smoothly into contours o mfg: aimpoint specs: aluminum, hardcoat anodized, matte black. US specification & reliable quality gun optics mount sets by Aimpoint. Part Nr: 12238.
More Details : click here
SEARCH this site : click here
|
|
|
Badger Ordnance Vietnam Era Usmc M40 Scope Base & Rings Usma M40 Scope Base & Rings Vietnam Era Reproduction US Specifications
USD 184.99
(Indicative price - actual current price possibly lower)
Technical data & information: The badger ordnance usmc m40 scope base & rings are a faithful reproduction of the base-and-ring set used on the vietnam war era m40 sniper rifle. Badger ordnance usmc m40 scope base & rings includes a reproduction of the redfield jr-type base used on the m40 from 1966 onward, and the rings have the correct, four-screws caps, just like the originals wore. Fits remington 700 short action compatible with reproduction redfield accu-range 3-9x40mm scopes accepts any scope with a 1" tube 4142 carbon steel, matte black oxide finish rear ring is adjustable for windage badger ordnance usmc m40 scope base & rings are a vital period-correct det mfg: badger ordnance. US specification & reliable quality gun optics mount sets by Badger. Part Nr: 30669B.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Isms Picatinny Mounts 34mm 1.18" 10.3 Moa Unimount US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a sinlge billet of aluminum. Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, prov mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: SP4301.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company Ar 15/M16 R.A.M.P. Tactical Mount Tactical R.A.M.P Mount 34mm Green US Specifications
USD 186.99
(Indicative price - actual current price possibly lower)
Technical data & information: The rapid acquisition multisight platform (r.A.M.P.) is a one-piece cantilever mount with integral scope rings that positions optics farther forward to provide 1" of extra space at the rear for mounting a long eye relief scope, night vision device, or magnifier. Features removable mil-std 1913 picatinny rails on the left and right sides that let you mount secondary sights 45 off-axis from the main optic. Each top ring strap is secured with four torx screws for recoil-proof holding power. Two large hex nuts and 3" long steel clamping bar lock the mount to a picatinny receiver rail. Smooth contours and radiused edges give a streamlined appearance, reduce weight, and prevent snagging. Model mfg: warne mfg. Company specs: 6061 t6 aluminum, hardcoat anodized, and steel hardware, magnesium phosphate finish, matte black. 71/8" (18.1cm) long, 23⁄8" (6cm) wide, 2βό" (5.7cm) high. Height measured from top of rail to bottom of ring: .75" (1.9cm). Approximately 9.7 oz. (275g) wei. US specification & reliable quality gun optics mount sets by Warne. Part Nr: RAMP34Z.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Tikka T3 1" Medium Scope Mount US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 940714.
More Details : click here
SEARCH this site : click here
|
|
|
Warne Mfg. Company X Skel Mounts 30mm Dark Earth US Specifications
USD 109.19
(Indicative price - actual current price possibly lower)
Technical data & information: Warne scope mounts is excited to introduce their second generation skel mount, the x-skel. This new msr mount offers an additional 1" of forward cantilever, and 1 piece clamp design for added strength. The rugged, lightweight design of the x-skel maintains our famous return to zero capability, and utilizes β½" hex nuts for rock solid attachment. It features a skeletonized ring body and caps for reduced weight and steel threaded cap inserts for maximum durability. The x-skel places your optic at the ideal height with a generous cantilever for proper eye relief, it will easily accommodate the longer eyepieces found on many of today's scopes. Lightweight mfg: warne mfg. Company. US specification & reliable quality gun optics mount sets by Warne. Part Nr: XSKEL30DE.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Dual Dovetail Rifle Bases Dual Dovetail Bases Winchester 70 Rvf 2 Pc Matte US Specifications
USD 26.99
(Indicative price - actual current price possibly lower)
Technical data & information: Leupold's famous rotary dovetail rings in both front and rear bases; there's no way a ring can shoot off its base. Ideal for large caliber, heavy kicking rifles that can throw a scope off easily, plus light caliber varmint rifles that need an absolutely rigid scope mount to make full use of the gun's accuracy potential. Dual dovetail bases and rings must be used together; will not interchange with other leupold rings and bases. Rings and bases sold separately; select the correct base set for your rifle, then choose rings.Those marked "rev. Frt." have reversible front base to help get correct ring spacing. Mfg: leupold specs: steel. Finish: standard std. And pb, polished, blue; matte, matte, blue; silver, matte. US specification & reliable quality gun optics mount sets by Leupold. Part Nr: 54241.
More Details : click here
SEARCH this site : click here
|
|
|
Spuhr Trg Tikka T3x Direct Isms Mount 34mm Isms Direct Mount 126mm Mounting Length 24 Moa US Specifications
USD 410
(Indicative price - actual current price possibly lower)
Technical data & information: The isms (ideal scope mount system) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a single billet of aluminum. Features direct mounting to trg integral scope rails. Will fit the tikka t3x without modifications. Older style t3's may require slight modifications to the ejection port (opening it approx. 1/10" downwards). M mfg: spuhr. US specification & reliable quality gun optics mount sets by Spuhr. Part Nr: ST4701.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Remington 700/725 La Low 30mm Scope Mounts 20 Moa US Specifications
USD 69.99
(Indicative price - actual current price possibly lower)
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 730700LM.
More Details : click here
SEARCH this site : click here
|
|
|
Zro Delta Dloc Venom Weaver Optic Mount US Specifications
USD 134.99
(Indicative price - actual current price possibly lower)
Technical data & information: The zrodelta dloc-venom optic weaver mount is a handy, low profile mount for adding a red dot sight on your rifle, pistol, or tactical shotgun. Heavy duty springs inside the side bar make installation easy, especially when mounting one handed. Mount clamps down hard on your weaver rail as soon as its dropped in place, then just hand tighten it for an unshakable grip. Attaches to weaver rail systems fits vortex venom red dot, vortex viper, burris fastfire ii & iii, some docter models can be mounted for left or right handed shooters tightening knob allows for hand tightening to rail without worry of mount integrity designed to allow for quick detachment/a mfg: zro delta. US specification & reliable quality gun optics mount sets by ZRO Delta. Part Nr: 7.023E+11.
More Details : click here
SEARCH this site : click here
|
|
|
Nightforce X Treme Duty Ultralite Unimounts 30mm 1.50 0 Moa Unimount US Specifications
USD 252
(Indicative price - actual current price possibly lower)
Technical data & information: Just because you have the best possible optic for your precision rifle doesn't mean you're ready for the field. Having a solid set of scope rings is also essential to the accuracy equation, and nightforce x-treme duty ultralite unimount scope rings are built to provide the essential link between your optic and rifle. Each nightforce x-treme duty ultralite unimount is machined from titanium alloy, providing an unprecedented combination of strength and lightness. The rings rise 1.50 inches from the top of the receiver, and sizes are available for both 30mm and 34mm scope tubes. One particular model of the nightforce x-treme duty ultralite unimount is designed specifically mfg: nightforce. US specification & reliable quality gun optics mount sets by Nightforce. Part Nr: A496.
More Details : click here
SEARCH this site : click here
|
|
|
Aero Precision Ultralight Extended Scope Mounts Ultralight 30mm Extended Scope Mount Black US Specifications
USD 54.99
(Indicative price - actual current price possibly lower)
Technical data & information: Featuring a rigid, lightweight design, aero precisions' ultralight extended scope mounts complement many high-end optic platforms. These scope mounts are designed to fit mil-spec 1913 picatinny rails with a cross-slot keyway that offers excellent recoil protection. The ultralight scope mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry. Rear ring is pushed forward 1" for better eye relief designed for ar type upper receivers 6061 t6 extruded aluminum construction rigid and lightweight weight: 3.07oz mfg: aero precision. US specification & reliable quality gun optics mount sets by Aero Precision. Part Nr: APRA210500.
More Details : click here
SEARCH this site : click here
|
|
|
Leupold Dual Dovetail Rifle Bases Dual Dovetail Bases Browning A Bolt Rvf 2 Pc Matte US Specifications
USD 24.99
(Indicative price - actual current price possibly lower)
Technical data & information: Leupold's famous rotary dovetail rings in both front and rear bases; there's no way a ring can shoot off its base. Ideal for large caliber, heavy kicking rifles that can throw a scope off easily, plus light caliber varmint rifles that need an absolutely rigid scope mount to make full use of the gun's accuracy potential. Dual dovetail bases and rings must be used together; will not interchange with other leupold rings and bases. Rings and bases sold separately; select the correct base set for your rifle, then choose rings.Those marked "rev. Frt." have reversible front base to help get correct ring spacing. Mfg: leupold specs: steel. Finish: standard std. And pb, polished, blue; matte, matte, blue; silver, matte. US specification & reliable quality gun optics mount sets by Leupold. Part Nr: 50159.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Kimber 8400 Medium 1" Scope Mounts US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 940840.
More Details : click here
SEARCH this site : click here
|
|
|
Talley Light Weight Scope Mount Browning A Bolt 1" Medium Scope Mount US Specifications
USD 46.99
(Indicative price - actual current price possibly lower)
Technical data & information: One-piece construction blends the ring and base into a single unit. Eliminating the ring/base joint not only keeps weight to a minimum, it provides a stronger mount. Each ring cap is 5⁄8" wide, with four, torx screws, to keep large scopes from slipping or shifting. Designed by mel forbes of new ultralight arms. Mfg: talley specs: 7000 series aluminum, black, anodized, matte finish. Accepts 1" dia. Scopes, unless otherwise listed in fits column for 30mm dia. Scopes. Height from bottom of ring to top of receiver: low, .400" (10.1mm), med, .500" (12.7mm). High, .640" (16.3mm), x‑high, .740" (18.8mm). Approx. We. US specification & reliable quality gun optics mount sets by Talley. Part Nr: 940000.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Gun Optics Mount Sets US Specifications
|
 Copyright © RexGuns.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
